A mathematical model for pre-Darcy flow in low permeability porous media with stress sensitivity and the boundary-layer effect

Pre-Darcy flow is widely found in many naturally porous media, such as low-permeability clay. Nonflowing liquid boundary layers strongly influence fluid flow in low-permeability porous media. There is evidence in the literature that the porosity and permeability of low-permeability porous media change with variations in the effective stress, which is called stress sensitivity. In this paper, a new mathematical model for pre-Darcy flow in low-permeability porous media is developed and validated with experimental data from the literature. The nonflowing boundary layer thickness can be obtained from the proposed model instead of the empirical equation. First, an equation for calculating the pore radius with stress sensitivity is derived. Two parameters εp and εr are defined to calculate the nonflowing boundary layer thickness. Second, based on the capillary bundle model, the apparent flow velocity and apparent liquid permeability of the porous media are determined. Finally, the stress sensitivity and boundary-layer effects on the apparent flow velocity and apparent liquid permeability are analyzed. The research results show that the effect of stress sensitivity on apparent flow velocity increases with increasing pore compressibility. When the pore compressibility Cp>0 MPa−1, the apparent liquid permeability increases continuously with increasing pressure gradient. When the pore compressibility Cp=0 MPa−1, the apparent liquid permeability continues to increase with increasing pressure gradient. The apparent liquid permeability eventually tends to a constant value. The apparent flow velocity decreases with εp, and εr decreases at a given pressure gradient. The larger εp and εr are, the faster the rate of increase in the apparent liquid permeability with increasing pressure gradient. The proposed model can estimate the apparent flow velocity at different pressure gradients with a high accuracy. This work is important for understanding flow phenomena in low permeability porous media, such as landslides caused by seepage of water in clay. •A low-velocity pre-Darcy flow model in low permeability porous media is developed.•The nonflowing boundary layer thickness was obtained from a new model.•The relationship between the boundary layer and the pressure gradient is established.•The effect of stress sensitivity on velocity and permeability is analyzed.•The effect of nonflowing boundary layer on velocity and permeability is analyzed.