CO2 soluble surfactants for carbon storage in carbonate saline aquifers with achievable injectivity: Implications from the continuous CO2 injection study

Continuous CO2 injection (CCI) into saline aquifers suffers from low sweep efficiency. While utilizing foam can effectively address this issue, a relatively potent foam design may undesirably reduce the injectivity of CO2. In this study, the potential of CO2-soluble surfactants assisted carbon storage in carbonate saline aquifers was evaluated by core flooding tests and numerical simulations. It is found that foam can be generated at the displacement front during continuous CO2 injection with 0.39 g/L surfactant (CCI + S, fg = 100 %). The CO2 saturation can reach 60 % after 1.0 pore volume of CCI + S, approximately 50 % higher than that of CCI. The maximum pressure gradient is around 1.5 psi/ft at an injection rate of 1.0 ft/d in 162 mD Indiana Limestone for CCI + S. The effects of surfactant concentration, foam quality, and rock permeability were also investigated by core flooding. Moreover, the influence of surfactant partitioning and adsorption on CO2 transport behavior was systematically evaluated by numerical simulation in synthetic and geological models, using modeling parameters that are realistic for field applications. The advantage of injecting surfactant with CO2 is more evident in heterogeneous saline aquifers. Such novel injection strategy provides a promising approach for carbon sequestration in saline aquifers by controlling the mobility of CO2 at the displacement front and simultaneously maintaining acceptable injectivity in the field. The CCI + S process may also impose less risk to the caprock. Expanding the potential CO2 storage sites to heterogeneous saline aquifers could be a game-changer. Our understanding of foam dynamics in porous media could also be advanced. [Display omitted] •Continuous CO2 injection with surfactant can improve the CO2 storage efficiency.•Injectivity for continuous CO2 injection with surfactant can be largely maintained.•An improved foam model with surfactant partitioning behavior is developed.•Carbon storage efficiency is improved in homogeneous and heterogeneous models.•Continuous CO2 injection with surfactant is a game-changer technology for heterogeneous aquifers.