Energy demand parametric analysis and geothermal heat exchanger design applied to a nearly zero energy PV building in northern Italy

Nearly-Zero-Energy and Zero-Emission Buildings are one fundamental part of the world strategies addressed at mitigating the global warming trend and coping with the goal of setting 1.5 °C the planet temperature increase with respect to the pre-industrial conditions. The present paper refers to a spe...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Energy and buildings 2024-08, Vol.316, p.114292, Article 114292
Hauptverfasser: Priarone, Antonella, Fossa, Marco, Morchio, Stefano, Silenzi, Federico
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Nearly-Zero-Energy and Zero-Emission Buildings are one fundamental part of the world strategies addressed at mitigating the global warming trend and coping with the goal of setting 1.5 °C the planet temperature increase with respect to the pre-industrial conditions. The present paper refers to a specific case study, the Smart Energy Building (SEB) located in the Savona Campus of the University of Genoa. The SEB is a very innovative building for both the envelope (ventilated highly insulated facades) and the energy systems (including a ground coupled heat pump and an exhaust air-to-air heat pump for building ventilation); the building is equipped also with a PV module field on the rooftop for electricity production. The present paper first evaluates the heating and cooling loads of the building by means of an EnergyPlus model and analyses the impact of different control strategies related to the temperature setpoints. In particular, case #1 refers to a minimum temperature to be assured by heating only in winter and to a maximum one to be avoided by cooling only during summer; on the other hand, in case #2 the temperature inside the building is controlled within a defined range (both heating and cooling modes) all year long. From EnergyPlus simulations, the hourly heat loads have been averaged as monthly values and employed for the calculation of the required overall length of the ground heat exchangers of the geothermal heat pump of the SEB building. The ground-side analysis is performed by applying the Authors’ ASHRAE-Tp8 method, in its recently released web version. For the BHE (borehole heat exchanger) calculations, a parametric analysis has been performed in terms of ground thermal conductivities. Finally, the PV electrical production has been estimated by EnergyPlus simulations and compared with the corresponding measured one, thus showing the net energy zero behaviour of the present building.
ISSN:0378-7788
DOI:10.1016/j.enbuild.2024.114292