Automatic bioacoustics noise reduction method based on a deep feature loss network

Acoustic sensors that collect acoustic data over extended periods and broad ranges are widely used in bioacoustics monitoring. However, in open environments, acoustic data collected using acoustic sensors can be subject to interference from various real-world noises, thereby influencing the subsequent analysis and processing of bioacoustic data. Existing bioacoustic noise reduction methods are limited in their application because of their low efficiency, unsuitability for non-stationary noise, generally unimproved signal-to-noise ratio (SNR) efficacy, and considerable amounts of residual noise. These limitations hinder the effective processing of recorded signals for which extraneous noise overlaps with bird vocalizations. In this study, we propose a bioacoustic noise reduction method based on a deep feature loss network for bird sounds. The method has a rapid denoising speed and can more effectively remove background noise from field recording signals without distorting the bird acoustic spectrum. The denoising effects of the proposed method were compared with those of a speech enhancement generative adversarial network, web real-time communications denoising, and other noise reduction methods. The denoising ability of these methods for different noises was evaluated using spectrograms and objective evaluation measures such as the SNR and perceptual evaluation of speech quality (PESQ). The experimental results revealed that our proposed noise reduction method can obtain higher SNRs and PESQ scores than other noise reduction methods, with the SNR increasing by up to 35.83 dB following denoising. •In open environments, acoustic data collected using acoustic sensor can be polluted.•Existing bioacoustics noise reduction methods are often limited.•We propose a bioacoustics noise reduction method for bird sounds.•Our method has a faster denoising speed and is more effective.•This noise reduction method can obtain higher SNR and PESQ.