Effects of nano-silica on fracture properties and mechanism analysis of basalt fiber reinforced concrete

The reinforcing effect of basalt fibers (BFs) on the performance of concrete mainly relies on the bridging effect of fibers, while recently, it has been shown that nano-silica (NS) may further enhance this effect. In this paper, three-point bending fracture tests were carried out on BF reinforced concrete (BFRC) to determine the optimal BF condition (i.e. volume content and length). Based on this optimal condition, the effect of NS content on the fracture performance of BFRC was examined from macroscopic and microscopic perspectives. The results indicate that the optimal BF condition for yielding the best concrete performance was 0.2 % volume content and 6 mm fiber length. Based on this condition, NS at 1 % mass content could improve its fracture performance to the best extent. Specifically, the crack initiation toughness, unstable fracture toughness and fracture energy were 1.83 MPa·m0.5, 3.35 MPa·m0.5 and 364.42 N/m, respectively, which were improved by 5.58 %, 15.93 % and 4.97 % compared to BFRC. NS mainly affects the crack propagation mode of BFRC by enhancing the fiber bridging effect or altering the way BFs play a bridging role. NS at an appropriate mass content can delay the occurrence of cracks and improve the deformation ability of BFRC. •The fracture properties of BFRC-NS were studied based on optimal BF condition.•1 % NS improves the fracture properties of BFRC most, especially in unstable toughness.•NS affects cracking by enhancing fiber bridging or altering the way to exert it.•A moderate amount of NS can delay crack initiation and inhibit crack growth.