Fatigue and post-fatigue behavior of FRCM-concrete specimens under direct shear and bending conditions

The combined effect of cyclic loading and steel rebar corrosion can determine the premature deterioration of reinforced concrete (RC) structures subjected to dynamic and environmental actions. The use of fabric-reinforced cementitious matrix composites (FRCM) is a promising solution to extend the fatigue life of RC structures. Externally bonded FRCMs are applied to the tension side of structural members to reduce the rebar stress level, thus delaying fatigue crack nucleation and/or propagation. A key aspect for the design of FRCM strengthening of these structures is the matrix-fiber bond behavior under fatigue loading. In this paper, a critical review of currently available studies on the fatigue behavior of FRCM-strengthened RC beams is presented. Then, the results of 25 bond tests on PBO FRCM-concrete specimens are provided and discussed. These tests include both single-lap direct shear and modified beam tests performed in quasi-static and cyclic mode. The results obtained show that the cyclic load may induce progressive debonding at the matrix-fiber interface with rupture of fiber filaments. Modified beam tests are more affected by these phenomena than direct shear tests. The rupture of fiber filaments is confirmed by the results of post-fatigue tests that show capacities lower than those of corresponding quasi-static tests.