Structural analysis of shield machine cutting monopile using p-y curve based finite element method

In this study, the structural response of piles during shield machine cutting is analyzed using p-y curves based on the finite element method (FEM). In the FEM program, the tangent stiffness matrix of the nonlinear soil-pile spring is derived from the tangent modulus of the p-y curve. The nonlinear finite element equation is solved using the Newton-Raphson iterative method. The program can consider the influence of the shield thrust force, the soil reinforcement, and the cross-sectional area decrease during shield cutting. The program output comprises the lateral displacement, internal force, and bending moment of the laterally loaded monopile. The correctness and accuracy of this method are validated with both field test data and commercial finite difference method (FDM) program. The results show that shield thrust force is the main factor affecting the lateral displacement and bending moment of the pile; as the cutting section area of the pile is decreasing, the maximum negative moment increases while the maximum positive moment decreases; soil reinforcement has a negligible effect on the internal force but can effectively reduce the lateral displacement of the pile head.