Investigation on spray and flame stabilization of a LOX/methane swirl coaxial injector
Variable-thrust cryogenic propellant rocket engines are gaining significant research interest in space exploration. However, low-frequency unstable combustion is still a challenging scenario, especially in fuel-rich preburner and low-thrust operating conditions of deep variable thrust. To deeply und...
Gespeichert in:
Veröffentlicht in: | Combustion and flame 2024-08, Vol.266, p.113532, Article 113532 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Variable-thrust cryogenic propellant rocket engines are gaining significant research interest in space exploration. However, low-frequency unstable combustion is still a challenging scenario, especially in fuel-rich preburner and low-thrust operating conditions of deep variable thrust. To deeply understand the mechanism of low-frequency unstable combustion, chemiluminescence images of CH* and background light images of the spray were obtained synchronously by chemiluminescence imaging and laser background light imaging, respectively. Both the spray and flame stabilization of liquid oxygen/methane swirl coaxial injector were studied through the continuous regulation of liquid oxygen mass flow rate. The results showed that low-frequency unstable combustion occur in both the start-up stage and the throttled stage under the fuel-rich condition at a frequency of 39.1∼48.1 Hz and an amplitude of 30% of the average combustor pressure. It is found that the two-phase flow instability of liquid oxygen is likely to induce spray and flame instability, resulting in low-frequency unstable combustion. The dimension subcooling degree of liquid oxygen is an important factor affecting unstable combustion. When the dimensionless subcooling degree is larger than 0.7, the low-frequency unstable combustion is suppressed. On the other hand, as the mixing ratio decreases, the flame oscillation mode gradually transforms from the longitudinal oscillation mode to contraction/expansion mode. Flame filling up and flashback processes can be observed in both flame oscillation modes, and the entropy coupling mechanism of the oscillation mode is explained in detail. Furthermore, an oscillation period is determined to include four processes: propellants filling up and flame liftoff; heat release of the combustion products and entropy disturbance; acceleration of the entropy wave through the nozzle creating an acoustic disturbance; and flame flashback, in which the heat release time of combustion products and entropy disturbance is the longest. |
---|---|
ISSN: | 0010-2180 |
DOI: | 10.1016/j.combustflame.2024.113532 |