Fatty amine incorporated nickel foam bearing with CNTs nanoarray: A novel composite phase change material towards efficient light-to-thermal and electro-to-thermal conversion

The fabrication of composite phase change material (CPCM) with splendid light-to-thermal conversion efficiency and enhanced thermal conductivity is of significance for solar energy storage and transition. Hence, we report the creation of a novel CPCM prepared by impregnating 1-hexadecanamine (HDA) into nickel foam (NF) bearing with carbon nanotubes (CNTs) nanoarray via simple vacuum impregnation for photothermal conversion. The NF bearing with CNTs nanoarray employed in this study show outstanding light absorption of higher than 97% originated from its vertical aligned CNTs nanoarray which makes it possible for trapping the light to the most extent. Moreover, the metal nature of NF coupled with the carbon nature of CNTs nanoarray endow it excellent thermal conductivity, e.g. the thermal conductivity of CPCM is improved by 46.3% compared to that of the pure HDA. Thanks to the high latent heat of HDA (240 J/g), the latent heat of the CPCM are measured to be 132.2 J/g. In addition, it shows excellent thermal stability, e.g. the latent heat of the CPCM remains nearly unchanged after 50 times of melting/freezing cycles. Beneficial from their outstanding light absorption, excellent thermal conductivity and high latent heat, the as-prepared CPCM is an ideal platform solar energy harvesting, storage and transition. Under 1sun irradiation, the light-to-thermal conversion efficiency of the CPCM was measured to be 80.10%. Moreover, we detected the temperature-time curve of the CPCM under 30 V voltage, the result show that the CPCM also has great potential in the electro-to-thermal conversion application. [Display omitted]