Targeted Quantitation Mode Comparison of Haloacetic Acids, Bromate, and Dalapon in Drinking Water Using Ion Chromatography Coupled to High-Resolution (Orbitrap) Mass Spectrometry

•A sensitive IC-HRMS approach for HAA analysis with direct injection and no postcolumn infusion of solvent•Using potassium hydroxide as the mobile phase for IC-HRMS provided better sensitivity than a carbonate/bicarbonate mobile phase•An analytical performance comparison of the three quantitative modes (full MS/dd-MS2, t-SIM/dd-MS2 and PRM) of HRMS for HAA determinations•In addition to highly sensitive HAA quantification, retrospective data mining was applied for the detection of non-targeted analytes, particularly for halogenated compounds A highly selective, sensitive, and simple analytical method for identification and quantification of nine haloacetic acids, bromate, and dalapon has been developed. This method uses ion chromatography (IC) coupled with electrospray ionization-high-resolution mass spectrometry (IC-ESI-HRMS) to directly analyze water samples on a high capacity anion-exchange column, eliminating the need for sample pretreatment/derivatization. Our study compared the following three types of targeted quantitation experiments using a quadrupole–orbitrap hybrid mass spectrometer, full-scan MS with data-dependent tandem mass spectrometry (full MS/dd-MS2 with inclusion list), targeted selected ion monitoring (SIM) with data-dependent tandem mass spectrometry (t-SIM/dd-MS2), and parallel reaction monitoring (PRM). Sensitivity, linearity, accuracy, and precision were validated following the guidelines of U.S. EPA Method 557. Single laboratory lowest concentration minimum reporting levels (LCMRLs) for the analytes using three different acquisition modes ranged from 0.0011 to 0.18 μg/L. All three quantitation modes showed good linearity for the eleven analytes with coefficients of determination of 0.9981- 0.9993. This IC-ESI-HRMS method was successfully applied to the analysis of commercial bottled water, tap water from San Francisco Bay Area, and the same tap water that has been through a filtered drinking water faucet. Both t-SIM/dd-MS2 and PRM modes were sensitive to confirm the trace-level presence of all nine HAAs, bromate, and dalapon in the tap water sample. Full-scan HRMS data acquisition provided the benefits of simultaneous data collection for both targeted and non-targeted components, and thus, suitability for simultaneous quantification of an unlimited number of compounds. Data-dependent MS/MS (dd-MS2) product-ion spectra were used for confirmation. All three modes showed good quantitative performance and obtained similar values. Single