Process modelling and assessment of thermochemical sulfur-iodine cycle for hydrogen production considering Bunsen reaction kinetics

•A flowsheet of SI cycle considering the Bunsen reaction kinetics was developed.•A user-defined Fortran module concerning Bunsen reaction kinetics was established.•Internal heat exchange network was created using pinch point temperature difference analysis.•The theoretical thermal efficiency of SI system was obtained in the range of 14.0–57.4 %. Thermochemical sulfur-iodine (SI) cycle is one of the large-scale, clean, and efficient hydrogen production routes. The Bunsen reaction process is always simulated by a stoichiometric reaction, without considering the realistic Bunsen reaction kinetic process. Herein, a user-defined Fortran module concerning Bunsen reaction kinetics was developed and embedded into a continuous stirred tank reactor (RCSTR), and then a SI flowsheet with 100 L/h hydrogen production was modeled. The key parameter optimization, mass and energy balance were analyzed, the internal heat exchange network was created using the pinch point temperature difference analysis and the principle of energy cascade utilization, along with thermal efficiency evaluation. Bunsen reaction process reaches equilibrium after a period, which is consistent with experiments. The increase of H2SO4 decomposition ratio is beneficial to reduce the energy consumption of system. Increase in temperature has less effect on increasing the equilibrium decomposition ratio of HI. The theoretical thermal efficiency of system reaches 14.0–57.4 % considering the recovery of exothermic heat. This work provides a theoretical basis for the optimization of SI cycle.