Construction of bilayer cellulose-based aerogel with salt-resistant design for efficient solar desalination and wastewater purification

Schematic of a bilayer aerogel with a unique layered structure designed to achieve low enthalpy water evaporation and salt resistance. [Display omitted] •The porous bilayer aerogel with vertically ordered arrangement was successfully prepared.•The designed bilayer aerogel exhibited excellent thermal management and salt resistance.•The evaporation rate of 1.9596 kg m−2h−1 and the energy conversion efficiency of 92.28 % were achieved.•The bilayer aerogel has salt-cleaning ability and long-term stability for desalination. Solar-driven interfacial evaporation (SDIE) technology, which utilizes green and renewable solar energy to produce clean water, has shown great potential in alleviating global water scarcity. However, practical applications still face numerous challenges, including salt crystallization precipitation and accumulation, low energy utilization, and complex preparation processes. Hence, We designed a vertically ordered porous bilayer aerogel based on nanofibrillated cellulose (NFC)/polyethyleneimine (PEI) with excellent salt resistance, light absorption and local thermal effects to achieve efficient solar steam generation. Specifically, the photothermal conversion layer (PCL) at the top had excellent light absorption and photothermal conversion efficiency by introducing graphene oxide (GO) as a highly efficient photothermal material. The water transport layer (WTL) at the bottom ensured a stable water supply to the evaporation layer by virtue of the vertical water transfer path and inherent hydrophilicity, and effectively prevented formation of salts in the evaporation area. In addition, the designed aerogel had a low thermal conductivity, which achieved effective thermal insulation and further enhanced the localized heating effect. This superhydrophilic bilayer aerogel achieved a high evaporation rate of 1.9596 kg m−2 h−1 and an energy conversion efficiency of 92.28% under one solar irradiation. It is noteworthy that evaporation process exhibited excellent stability during 8 h of continuous evaporation in 20 wt% brine and no salt accumulation was observed on the evaporated surface. In addition, the bilayer aerogel demonstrated excellent long-term stability and self-cleaning. Meanwhile, its excellent anti-contamination and wastewater treatment capabilities give SDIE technology a stable and continuous operation in practical applications, thus demonstrating significant application potential.