Diminish charge loss by mica incorporation into nylon nanofibers for performance enhancement of triboelectric nanogenerators operating in harsh ambient

[Display omitted] •Mica/nylon 66 composite nanofibers were fabricated by electrospinning process.•The electric field loss was diminished by incorporation of mica into the nylon 66 nanofibers.•Triboelectric nanogenerator with composite nanofibers showed robust performances under harsh environment. The triboelectric nanogenerator (TENG) is a fascinating energy-harvesting device that utilizes the triboelectric effect caused by contact electrification and electrostatic induction. Nylon 66 is used widely in TENG applications because it is a representative tribo-positive polymer with excellent biocompatibility. On the other hand, the generated charges are vulnerable to discharge due to moisture in the air, which impedes the TENG performance in harsh environments. Moreover, the dielectric loss, which generates heat by consuming the considerable electric charge in triboelectric materials, significantly degrades the TENG performances. This study fabricated the composite nanofiber (NF) structure of nylon 66 and mica, which has excellent electrical insulation, low dielectric loss, high thermal conductivity, and enhanced tribo-positive properties, to circumvent these problems. Embedding the mica into the nylon NFs enhanced the TENG performance and prevented performance degradation even in harsh environments at a relative humidity of 70%. Furthermore, after 100,000 cycles of friction, the nylon/mica composite NFs showed smaller temperature increments than the pristine nylon NF because of the low dielectric loss and efficient heat dissipation of the mica. The nylon/mica composite NFs were applied to a sustainable and wearable power generator operating in a humid and hot environment by attaching the device to the forearm and soles of the feet. The generators were efficient enough to turn on 80 light-emitting diodes.