Polymer solid electrolytes with ultra-stable cycles and high-capacity retention for all-solid-state Li-metal battery

[Display omitted] •Developed polymer solid electrolyte membrane using solution casting method.•Achieved high ionic conductivity and strong mechanical properties in BPE membrane.•Demonstrated ultra-stable cycles and high-capacity retention in ASSLMBs. Polymer electrolytes have become widely popular on account of their low expenses, reduced weight, simple processing, and excellent safety features. However, polymer electrolytes have yet to find use in commercial batteries because of their limited mechanical durability and poor ionic conductivity. In this paper, an ultra-stable cycles and interfaces blending polymer electrolyte (BPE) suitable for all solid-state Li metal batteries was prepared by blending three polymers: polymethyl methacrylate (PMMA), polyvinylidene fluoride hexafluoropropylene (PVDF-HFP), and polyethylene oxide (PEO). Microstructure characterization showed numerous amorphous areas with strong interfacial strength of the BPE. The BPE3 exhibited a maximum of 15.65 MPa in tensile strength. BPE2 have excellent electrochemical performance, such as wide electrochemical windows (up to 4.7 V vs Li/Li+), high lithium ion transference numbers (up to 0.75), high ion conductivity (up to 1.87 × 10-4 S cm−1 at 60 °C), and excellent interface stability. By assembling all state-solid LiFePO4/BPE2/Li batteries for electrochemical testing, BPE2 exhibit high electrochemical characteristics. BPE2 discharge specific capacity is as high as 154.7 mAh g−1 at 1C. The BPE2 underwent 200 cycles at 0.5C and 400 cycles at 1C, with capacity retention rates of 95.7 % and 96.6 %, respectively. BPE is a promising electrolyte candidate for flexible lithium metal batteries.