Time-resolved X-ray study of assisted fluidization of cohesive micron powder: On the role of mechanical vibration

[Display omitted] •Unassisted and vibro-fluidized beds are studied using X-ray imaging technique.•Spatio-temporal evolution of flow patterns and hydrodynamic events are analyzed.•Vibro-fluidized beds develop three distinct flow regions with clear interfaces.•Effects of altering frequency and amplitude are identified independently. Mechanical vibration has been broadly used to assist fluidization of cohesive powders, because of its capability to disrupt gas channels and agglomerates. However, the improvement reported in literature is mostly deduced from bulk response and ex-situ measurements, whereas the induced fluidization behavior and underlying physics remain largely unexplored. In this work, the fluidization behavior of micron-sized cohesive silica (Sauter mean diameter D32 = 7.9 μm) has been investigated experimentally under vibration of varying conditions. X-ray imaging was carried out to directly capture the temporal evolution of system hydrodynamics, and identify in-situ powder stratification, bubbling and channel formation. The study demonstrates that vibration effectively collapses gas channels, yet facilitates powder stratification and compaction, therefore developing three distinctive flow regions inside the bed with different fluidization states. Consequently, common measurements, such as pressure drop and bed expansion, tend to overestimate the improvement. In addition, increasing frequency, from 10 Hz to 30 Hz, is observed to increase the number of bubbles by 60 %, whereas a large amplitude (e.g., 2 mm) leads to a 10 % compaction in the top flow region.