Experimental investigation and decoupling of voltage losses distribution in proton exchange membrane fuel cells with a large active area

[Display omitted] •In-situ monitoring technology for the fuel cells is proposed.•A method for decoupling the three kinds of voltage losses in fuel cells is built.•The internal states and voltage losses in large area fuel cells are analyzed.•The effect of operating conditions on the voltage losses is...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Chemical engineering journal (Lausanne, Switzerland : 1996) Switzerland : 1996), 2023-01, Vol.452, p.139497, Article 139497
Hauptverfasser: Zhou, Zihan, Ye, Lingfeng, Qiu, Diankai, Peng, Linfa, Lai, Xinmin
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:[Display omitted] •In-situ monitoring technology for the fuel cells is proposed.•A method for decoupling the three kinds of voltage losses in fuel cells is built.•The internal states and voltage losses in large area fuel cells are analyzed.•The effect of operating conditions on the voltage losses is investigated. Understanding the local operating state and voltage loss distributions are of great importance to guide the performance improvement of proton exchange membrane fuel cells (PEMFCs). Especially when the active area is large, the uneven electrochemical reaction becomes more severe. However, the current research does not enable the simultaneous monitoring of the multiple operating states and decoupling of the voltage losses in the fuel cell. In this study, a method is established that can obtain the distribution of activation polarization, ohmic loss, and concentration polarization by analyzing the measured data of temperature, humidity, current density, and high-frequency resistance (HFR), which are obtained inside a 320 cm2 and 3 kW level fuel cell stack by using the multilayer printed circuit board (PCB) technology with designed isolation segments. The effects of humidity, operating temperature, and current density on the distributions of output voltage and voltage losses are discussed. Results show that the potential distribution on the surface of membrane exchange assembly (MEA) isn’t uniform in the large active area. The activation polarization gradually increases in the direction of coolant flow and the direction of the cathode flow and the ohmic loss and concentration polarization have opposite distribution characteristics. In addition, when the humidity rises to full humidity, the inhomogeneity of ohmic loss distribution becomes higher with three local increased areas of 20 mV and one decreased area of −20 mV. Higher temperatures can significantly reduce the flooding near the outlet of the active area. When the current density increases, the inhomogeneity of the ohmic loss distribution increases, and the concentration polarization near the cathode outlet of the active area become more severe.
ISSN:1385-8947
1873-3212
DOI:10.1016/j.cej.2022.139497