Metastable intermixed Core-shell Al@M(IO3)x nanocomposites with improved combustion efficiency by using tannic acid as a functional interfacial layer
[Display omitted] •Tannic acid is used as an interfacial layer to tailor the monodisperse core-shell metal iodate-based MICs.•The modified MIC shows better long-term storage stability, enhanced thermal reactivity and energy release.•The improved combustion efficiency and burning rate have been demon...
Gespeichert in:
Veröffentlicht in: | Chemical engineering journal (Lausanne, Switzerland : 1996) Switzerland : 1996), 2020-03, Vol.384, p.123369, Article 123369 |
---|---|
Hauptverfasser: | , , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | [Display omitted]
•Tannic acid is used as an interfacial layer to tailor the monodisperse core-shell metal iodate-based MICs.•The modified MIC shows better long-term storage stability, enhanced thermal reactivity and energy release.•The improved combustion efficiency and burning rate have been demonstrated.
As is known to all, the nano-aluminum (n-Al) of metastable intermixed composites (MICs) could be easily and slowly oxidized during long-term storage. Herein, a plant polyphenol, tannic acid (TA), has been used to coat n-Al as an interfacial layer to bind with metal iodates (Fe(IO3)3, Cu(IO3)3, Bi(IO3)3) forming MICs with tunable reactivity. The latter can be in-situ synthesized on the surface of TA to construct a core-shell n-Al@TA@M(IO3)x MICs suing a facile, green and low-cost chemical way. Various characterization techniques are used to investigate the prepared these core-shell MICs, including scanning electron microscopy, transmission electron microscopy, X-ray energy dispersive spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, thermal analysis, bomb calorimetry and high-speed camera. The results showed that the obtained novel MICs were almost monodispersed and uniformly distributed. They have shown enhanced performances in terms of thermal reactivity, long-term storage, energy releases and combustion efficiency. For the thermal reactivity, the major exothermic peak temperature of n-Al@TA@M(IO3)x can be reduced by about 16.9–48.6 °C by using TA as an interfacial layer in comparison with the mechanically mixed n-Al/M(IO3)x. For the long-term storage stability, the energy loss of n-Al@TA@Fe(IO3)3 (11.0%) after three weeks aging is much less than that of n-Al/Fe(IO3)3 (35.3%). For the energy release, Fe(IO3)3-based MICs can be increased to 24.1 kJ cm−3 (14.5% higher), whereas the Cu(IO3)3-based MICs to 22.8 kJ cm−3 (19.4%) and Bi(IO3)3-based MICs to 20.2 kJ cm−3 (3.1%). The burning rates of n-Al@TA@M(IO3)x are 1.7 to 4.3 times higher than that of n-Al/M(IO3)x, and the flame of n-Al@TA@M(IO3)x is more homogeneous than that of n-Al/M(IO3)x. |
---|---|
ISSN: | 1385-8947 1873-3212 |
DOI: | 10.1016/j.cej.2019.123369 |