Experimental investigation of time-dependent electrical load effects through multipoints in-situ measurement of temperature and relative humidity of PEMFC bipolar plate under transient operation

•Multiple micro-RH/T sensors were installed in PEMFC cathode and anode channels.•Water distribution was analyzed by using dewpoint temperature.•Temperature and water transient behavior inside PEMFC channels were obtained.•Time-dependent effects on transient behavior of PEMFC were investigated. In this study, multiple micro-relative humidity and temperature (RH/T) sensors were installed in the anode and cathode channels of a proton exchange membrane fuel cell (PEMFC) bipolar plate to simultaneously observe and analyze the variation in RH/T behaviors during transient operation. In order to simulate the acceleration and deceleration process, the electrical load was ramped from 10 to 40 A and then back to 10 A, with time intervals of 0, 2, and 5 s. The data corresponding to different acceleration/deceleration time intervals were compared and analyzed to assess the time-dependent effects of load changes. The analyzed data provide visual information, including the transient voltage response, transient behavior of temperature and water distribution, and evolution of RH/T within PEMFC. The results indicate that the acceleration and deceleration interval times significantly influence the temperature and water distribution within PEMFC during transient operation. Shorter acceleration times lead to more rapid changes in temperature and humidity within the PEMFC active area, resulting in higher transient temperature and water concentration. This finding explains why the output voltage decreases more when the load changes with a short time interval. This research enhances our understanding of transient temperature and water behavior, providing a foundation for further research and development of effective operational strategies and vehicle PEMFC designs.