An advection-diffusion-mechanical deformation integral model to predict coal matrix methane permeability combining digital rock physics with laboratory measurements
This study proposed an advection-diffusion-mechanical deformation integral model to predict coal matrix methane permeability combining digital rock physics with laboratory measurements. The coal matrix pore network was first extracted from the segmented 3D digital coal image. Organic pore-controlled...
Gespeichert in:
Veröffentlicht in: | Applied geochemistry 2021-03, Vol.126, p.104861, Article 104861 |
---|---|
Hauptverfasser: | , , , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | This study proposed an advection-diffusion-mechanical deformation integral model to predict coal matrix methane permeability combining digital rock physics with laboratory measurements. The coal matrix pore network was first extracted from the segmented 3D digital coal image. Organic pore-controlled methane transport pathways and mineral-associated pore methane transport pathways were identified from the coal matrix pore network. Advection and Knudsen diffusion processes were considered for methane transport in the mineral associate pores and bulk methane transport in organic pores. To determine the adsorbed methane surface diffusion ability in organic pores, laboratory adsorption and desorption experiments were conducted to determine the desorption curve and critical desorption pressure. Pore shrinkage was considered for organic pores and mineral-associated pores whereas sorption-induced volumetric strain was also modeled for the organic pore system. The coal matrix methane permeability was calculated over a wide range of production pressures and the influences of reservoir and methane transport properties on coal matrix methane permeability were analyzed in detail. Results revealed that gas slippage and initial formation pressure dominate the coal matrix methane permeability more than other influencing factors. Coal matrix methane permeability was underestimated by at least 40% by using Darcy flow to describe methane flow in the coal matrix and the influence of organic matter bulk modulus variation on coal matrix methane permeability can be neglected at initial formation pressures less than 10 MPa.
•An advection-diffusion-deformation coal matrix methane permeability model is proposed.•Pore size change caused by stress and sorption-induced volume are modeled.•Methane transport mechanisms in different pore types are considered.•Influences of geochemical properties on coal matrix methane permeability are studied. |
---|---|
ISSN: | 0883-2927 1872-9134 |
DOI: | 10.1016/j.apgeochem.2020.104861 |