A flexible integrated temperature-pressure sensor for wearable detection of thermal runaway in lithium batteries

Temperature and pressure variations are the key early warnings for the thermal runaway safety monitoring of lithium batteries. Although flexible temperature and pressure integrated sensors can well address the implantation problem encountered by wearable battery detection, the pressure and temperature dual parameter decoupling is still unsolved. Herein, based on the piezoresistive and heat-sensitive effects, we developed a dual-parameter flexible integrated sensor to continuously monitor the temperature and pressure changes at the same position on the surface of the lithium battery, thus realizing the dual-parameter in-situ decoupling. The coupling mechanism is attributed to the positive and negative resistance temperature coefficients of nickel (Ni) and carbon nanotubes (CNT), and hence a CNT/Ni/PVP/GF pressure-sensitive film with near-zero resistance temperature coefficient was achieved using circular interfinger-electrodes on a glass fiber (GF) substrate. Temperature decoupling was successfully realized in the temperature range of 20–100 °C and the pressure range of ≤200 kPa. The sensor also exhibits a fast response (192 ms) and recovery time (96 ms) with good pressure repeatability. Furthermore, the temperature sensitive points based on graphene (GP) and carbon nanotube (CNT) were prepared at the center of the pressure-sensitive membrane by using structural scale effects and material strain coefficient differences. The wide temperature range of 0–150 °C and the high temperature resolution of 0.5 °C were reached, and the pressure deformation could be decoupled. The sensor was affixed to the aluminum film airbag and embedded in the battery module for the overcharge thermal runaway test analysis. The results verified the feasibility of safety monitoring of the prepared flexible battery wearable sensor and the effectiveness of integrated dual-parameter decoupling. [Display omitted] •A flexible temperature-pressure sensor with two-parameter decoupling is proposed.•Flexible electronic printing technology is used to manufacture the sensor.•An arc interfinger electrode which is not affected by pressure direction is designed.•The sensor is embedded into the lithium battery module for thermal runaway detection.•The concept of wearable battery detection based on flexible sensor is proposed.