Compact symmetrical slot coupled linearly polarized two/four/eight element MIMO bowtie DRA for WLAN applications

This paper presents a compact and low cost MIMO (Multiple-Input-Multiple-Output) Bowtie dielectric resonator antennas for two, four and eight elements for public safety entities (4.94–4.99 GHz) and indoor WLAN (5.15–5.35 GHz) applications. The fractional impedance bandwidth (4.72 GHz – 5.44 GHz) is...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:International journal of electronics and communications 2021-06, Vol.135, p.153729, Article 153729
Hauptverfasser: Kethavathu, Srinivasa Naik, Singam, Aruna, Muthusamy, Pachiyannan
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This paper presents a compact and low cost MIMO (Multiple-Input-Multiple-Output) Bowtie dielectric resonator antennas for two, four and eight elements for public safety entities (4.94–4.99 GHz) and indoor WLAN (5.15–5.35 GHz) applications. The fractional impedance bandwidth (4.72 GHz – 5.44 GHz) is 14.17% for all ports and strengthens the targeted frequency range gain. Two bubbled I-shape embedded inside the rectangular box defective ground structure to enhance the separation between ports by etching therefore over the operating frequency band, isolation between ports exceeds 25 dB and maximum ECC (envelope correlation coefficient) of 0.04. The designed compact unit cell antenna has a dimension of 30 × 25.6 mm2 (i.e. 0.5λ0 × 0.4 λ0 where λ0 is calculated at 5.2 GHz in the free space) and finally proposed 8-element antenna having a size of only 120 × 51.2 mm2 (2.07 λ0 × 0.88 λ0). Within their finest values, MIMO diversity performance parameters are obtained. The gain of the antenna unit cell, two, four and eight elements are 5.24 dBi, 5.49 dBi, 5.68 dBi and 6.2 dBi respectively and these gain values are most suitable for WLAN applications. To show the simulated performance, a prototype of all radiators would be manufactured and tested experimentally and measured results are good agreement with simulation result.
ISSN:1434-8411
1618-0399
DOI:10.1016/j.aeue.2021.153729