Investigations on the interface-dominated deformation mechanisms of two-dimensional MAX-phase Ti3Al(Cu)C2 nanoflakes reinforced copper matrix composites

Two-dimensional (2D) materials showing the giant advantage over their bulk counterparts are believed to be the ideal reinforcement for metal matrix composites, whereas the deformation mechanism of which is currently unknown. Herein, we investigated the interface effect of 2D MAX phase Ti3Al(Cu)C2 nanoflakes (MAX NFs) obtained by a Cu-atoms-diffusion assisted exfoliation method on the plastic deformation process of Cu matrix. Tensile tests demonstrated a simultaneous enhancement in strength and fracture elongation with the increase of MAX NFs content. The composites exhibited a four-stage deformation process involving an extended “yield plateau” before obvious strain hardening stage. Microstructural examination revealed that the 2D nature of MAX NFs and the coherent interface structure facilitated the nucleation of partial dislocations, which coordinated the initial plastic deformation by gliding and interacting to form Lommer-Cottrel (LC) locks. At high strain levels, both LC locks and MAX NFs served as obstacles for dislocation cross-slip and thus achieved significant forest hardening (or latent hardening) effect, validated by EBSD texture from the in-situ tensile tests and visco-plastic self-consistent simulation. This sort of interface-induced microstructure evolution promoted tortuous micro-cracks along discontinuous slip bands and significant crack bridging and deflection extrinsic toughening mechanisms. The current findings provide a possible strategy of simultaneously enhancing strength and ductility through tailoring 2D geometric shape of reinforcements and their interface with the metal matrix. [Display omitted]