P‐7.10: Facile low‐temperature solution‐processed ZrO 2 films as high‐k dielectrics for flexible low ‐ power thin‐film transistors

Wearable electronics represented by flexible displays and flexible sensors have been attracting enormous attention due to portability, miniaturization and low power consumption. Due to the dramatic increase in the number of display and sensing units, the power consumption and accuracy of the devices are facing great challenges. Active‐matrix thin‐film transistor (TFT) backplanes can effectively reduce signal crosstalk and power consumption of wearable electronics. For TFT devices, the gate insulation layer is one of key factors affecting the device performance such as device mobility, operating voltage, and bias stability, etc. High quality of solution‐processed oxide dielectric films usually are obtained at a high temperature (>400 °C), being a challenge for compatibility with flexible plastic substrates. In this work, low‐temperature annealing processes (the electric oven (EO) and deep ultraviolet (DUV) processing) of high‐k zirconia dielectric films was investigated. Compared to the thermal annealing process, the EO or DUV processing‐annealing process could obtain an approximate dielectric properties with that of thermal annealing process. The EO and DUV processing could effectively promoted the MO framework and the elimination of oxygen defects in the spin‐coating films. DUV processing ZrO 2 film annealed at 150 °C exhibited an excellent properties including a large capacitance of 220 nF/cm 2 and low leakage current of ~10 ‐7 A/cm 2 . These data suggest that combining low‐temperature annealing with EO and DUV irradiation holds great promise for the rapid, low‐temperature production of high‐quality and flexible oxide electronic devices.