Melt homogeneity in injection molding: Application of a ring-bar device

A thermocouple ring‐bar device located between the nozzle and screw‐tip was used to study the thermal homogeneity of a shot formed during injection molding. Axial and radial melt temperature profiles thus observed under various processing conditions illustrated the importance of screw channel volume...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Polymer engineering and science 1989-02, Vol.29 (3), p.202-208
Hauptverfasser:	Peischl, G. C., Bruker, I.
Format:	Artikel
Sprache:	eng
Schlagworte:	Applied sciences Exact sciences and technology Injection moulding Machinery and processing Moulding Plastics Polymer industry, paints, wood Technology of polymers
Online-Zugang:	Volltext
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	A thermocouple ring‐bar device located between the nozzle and screw‐tip was used to study the thermal homogeneity of a shot formed during injection molding. Axial and radial melt temperature profiles thus observed under various processing conditions illustrated the importance of screw channel volume‐to‐short‐size ratio on melt homogeneity, Several methods of improving melt quality, as measured by this device, are demonstrated.
ISSN:	0032-3888 1548-2634
DOI:	10.1002/pen.760290308