Process control of injection molding
This paper discusses the most important input parameters affecting the conventional injection‐molding process and describes a closed‐loop control system for determining the interaction between ten process inputs and three output parameters. The input parameters are: back pressure, holding pressure,...
Gespeichert in:
Veröffentlicht in: | Polymer engineering and science 1983-06, Vol.23 (8), p.431-438 |
---|---|
1. Verfasser: | |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | This paper discusses the most important input parameters affecting the conventional injection‐molding process and describes a closed‐loop control system for determining the interaction between ten process inputs and three output parameters. The input parameters are: back pressure, holding pressure, injection time, open mold time, shot size, clamping pressure, injection pressure, screw speed, and boost cut‐off. The output parameters studied are: part weight, maximum cavity pressure, and maximum mold deflection. |
---|---|
ISSN: | 0032-3888 1548-2634 |
DOI: | 10.1002/pen.760230804 |