A Novel Molecularly Imprinted Potentiometric Sensor for the Fast Determination of Bisoprolol Fumarate in Biological Samples

In this study, molecularly imprinted polymer (MIP) was prepared and used in the preparation of carbon paste electrode (CPE) for the quantification of bisoprolol fumarate (BF) in pure, pharmaceutical formulation and biological fluids. The selective MIP for BF was synthesized from methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross‐linker in dimethyl sulfoxide solution, BF as the template molecule and 2, 2‐azobisisobutyronitrile (AIBN) as the initiator. The non‐imprinted polymer (NIP) was synthesized by the same procedure, but in the absence of the template molecule then incorporated in the paste of the carbon paste electrodes (CPEs). The prepared MIP for BF and its corresponding NIP were well characterized using scanning electron microscopy (SEM), Fourier transform infrared spectrometer, and thermal gravimetric analysis (TGA). The MIP and NIP based CPEs were further used for the determination of BF and the obtained results indicated that the sensor modified by the MIP have much higher recognition power for the BF molecules than the NIP based sensor where the MIP based CPE exhibited a Nernstian response 29.50±0.55 mV decade−1 within a concentration range of 1.0×10−7–1.0×10−2 mol L−1and pH independence in the range 3.50–7.15. The proposed sensor has high selectivity over several possible interfering compounds. The obtained results by the proposed sensor were satisfactory with excellent percentage recovery and relative standard deviation and were comparable with those obtained from HPLC reported method.