Improved Morphology and Performance of Solution‐Processed Metal‐Oxide Thin‐Film Transistors Due to a Polymer Based Interface Modifier

The influence of a polymer interface modifier on the performance of solution‐processed indium‐based metal‐oxide (MO) thin‐film transistors (TFTs) is investigated. We use the polymer ethoxylated polyethylenimine (PEIE). Compared to a reference sample this modification enhances the mobility by a factor of four, clearly reduces the contact and the sheet resistance, and decreases the charge carrier activation energy by about 20%. The improved electrical performance originates from both a reduced contact and a reduced sheet resistance of the TFTs. The molecular dipole of PEIE reduces the work function of the electrodes. Adversely the dipole enhances the off current and the trap density at the semiconductor/dielectric interface for bottom‐contact transistors with small channel length. The substrate becomes highly polar with a PEIE‐treatment. Accordingly, topographical studies of bottom‐contact TFTs show a very similar MO film morphology on the electrodes and in the channel for modified TFTs, whereas in the untreated samples the film has a higher roughness on the electrodes than in the channel. TFTs in top‐contact configuration with the polymer interface layer at the dielectric/semiconductor interface also show higher mobility compared to the reference MOTFTs which displays that the improved performance is due to the improved morphology of the MO film. The role of the polymer‐based interface modifier ethoxylated polyethylenimine (PEIE) in metal‐oxide thin‐film transistors is studied in detail via a combination of morphology studies, work function determination, and electrical measurements. The enhanced performance of PEIE‐treated TFTs results directly from both a reduced contact resistance and from an improved morphology leading to a reduced sheet resistance.