Incoporating Ammonia Synthesis for an Offshore Gas-to-Liquid Process

The world energy demand is increasing, and so is the demand for fertilizer to sustain an exponential population growth. Currently, with low oil prices, asso- ciated natural gas is flared off or re-injected into oil reservoirs for enhanced oil recovery (EOR). A gas-to-liquid process (GTL) for offshore applications aboard a foating production, storage, and offoading vessel (FPSO) incorpo- rating Fischer-Tropsch Synthesis (FTS) seeks to reform natural gas into more valuable liquid products. As the composition of natural gas feeds varies greatly depending on location and other factors, a surplus of hydrogen production is maintained in order to have a steady production of the desired FTS products. An alternative use for this surplus hydrogen is in ammonia synthesis, which in a relatively simple process design using readily available streams in the GTL process, can produce considerable amounts of ammonia. A complimentary design to an existing GTL process designed for offshore appli- cations which seeks to incorporate ammonia synthesis is proposed. Two possible designs are tentatively suggested and evaluated, each design utilising different streams in the GTL process with a high nitrogen content, in addition to the surplus hydrogen stream in the GTL process. The process design features a synthesis loop, as well as removal of compounds containing oxygen, such as CO2 and water, as these compounds are poisonous to the ammonia synthesis catalyst. The ammonia synthesis reactor is simulated as three separate beds, with a refrigeration loop to cool the stream exiting the reactor to sub-zero tem- peratures in order for ammonia to condense and be separated from the synthesis loop. Uncondensed ammonia and unreacted hydrogen and nitrogen gas is recy- cled and reintroduced to the reactor. Two separate process designs were simulated in Aspen HYSYS V8.6, each with a different source of nitrogen. The basis for the nitrogen sources for the ammo- nia synthesis process are the streams pertaining to the GTL process proposed by Hillestad et.al. Two different kinetic models were also evaluated. Heat integration is performed in Aspen Energy Analyzer V8.6, and a heat exchanger network (HEN) is proposed. The best process design features the N2 -rich stream from the membrane in the air enrichment unit in the GTL process, as this offers a simpler process design compared to utilising the tailgas from the GTL process. The system is optimised using the Temkin-Pyzhev kinetic model for the amm