AlGaN/AlN Stranski-Krastanov quantum dots for highly efficient electron beam pumped emitters: The role of miniaturization and composition to attain far UV-C emission

Conventional ultraviolet (UV) lamps for disinfection emit radiation in the 255-270 nm range, which poses a high risk of causing cancer and cataracts. To address these concerns, solid-state far UV-C sources emitting below 240 nm are gaining attention as a safe and sustainable disinfection solution for occupied spaces. Here, we delve into the extension of the AlxGa1-xN/AlN quantum dot (QD) technology towards the far UV-C range, which presents various challenges associated with the reduction of the lattice mismatch and band offset when Al is incorporated in the QDs. We explore the structural and optical impact of increasing the Al content through the increase of the Al flux and eventual correction of the Ga flux to maintain a constant metal/N ratio. We also examine the impact of extreme miniaturization of the QDs, achieved through a reduction of their growth time, on the spectral behavior and internal quantum efficiency (IQE). The high Al content results in QDs with a reduced aspect ratio (height/diameter) and thicker wetting layer when compared to the GaN/AlN system. Self-assembled QDs grown with a metal/N ratio ranging from 0.5 to 0.8 show an IQE around 50%, independent of the Al content (up to 65%) or emission wavelength (300-230 nm). However, samples emitting at wavelengths below 270 nm exhibit a bimodal luminescence associated with inhomogeneous in-plane emission attributed to fluctuations of the QD shape associated with extended defects. Reducing the QD size exacerbates the bimodality without reducing the emission wavelength. The power efficiencies under electron beam pumping range from 0.4% to 1%, with clear potential for improvement through surface treatments that enhance light extraction efficiency.