Active and Adaptive Control of Supersonic Impinging Jets

The behavior of supersonic impinging jets is dominated by a feedback loop due to the coupling between the fluid and acoustic fields. This leads to many adverse effects when such flows occur in short takeoff and vertical landing aircraft, such as a significant increase in the noise level, very high unsteady loads on the nearby structures, and an appreciable loss in lifting during hover. In earlier studies, it was demonstrated that by using supersonic microjets one could disrupt the feedback loop that leads to substantial reductions in the aforementioned adverse effects. However, the effectiveness of control was found to be strongly dependent on the ground plane distances and the jet operating conditions. The effect of various microjet control parameters are investigated in some detail to identify their influence on control efficiency and additional insight is provided on the physical mechanism behind this control method. Parameters studied include microjet angle, microjet pressure, and the use of microtabs instead of microjets. These results indicate that by choosing appropriate control parameters it should be possible to devise a control strategy that produces optimal control for the entire operating range of conditions of the supersonic impinging jet. Moreover, the experimental results provide convincing evidence of the generation of significant streamwise vorticity by the activation microjets. It is postulated that the generation of streamwise vorticity and its evolution in the jet flow might be one of the main physical phenomena responsible for the reduction of flow unsteadiness in impinging jets.[PUBLICATION ABSTRACT]