Low-Lattice Thermal Conductivity in Zr-Doped Ti2NiCoSnSb Thermoelectric Double Half-Heusler Alloys

The effect of doping on the thermoelectric properties of Half-Heusler (HH) high-entropy alloy (HEA) Ti2NiCoSnSb was studied. Lower thermal conductivity was observed with increased Sb doping. Mass scattering by heavy (Ta, Zr) and light (Al) dopants was studied to further lower the thermal conductivit...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:ACS applied energy materials 2023-06, Vol.6 (11), p.6262-6277
Hauptverfasser: Mishra, Soumya Ranjan, Tan, Li Ping, Trivedi, Vikrant, Battabyal, Manjusha, Sankara Rama Krishnan, P. S., Repaka, Durga Venkata Maheswar, Yadav, Satyesh Kumar, Ramanujan, Raju Vijayaraghavan, Murty, Budaraju Srinivasa
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The effect of doping on the thermoelectric properties of Half-Heusler (HH) high-entropy alloy (HEA) Ti2NiCoSnSb was studied. Lower thermal conductivity was observed with increased Sb doping. Mass scattering by heavy (Ta, Zr) and light (Al) dopants was studied to further lower the thermal conductivity. Dopants at the level of up to 50% at the Ti site were studied. A high HH phase content was obtained in the Zr-doped samples, and a low-lattice thermal conductivity of 1.9 W/(m·K) was observed. This value is one of the lowest reported lattice thermal conductivities in HH alloys. The poor solubility of Ta led to undissolved Ta in the samples, which enhanced the electrical properties. In the case of Al doping, the NiAl phase raised the power factor value of Ti1.8Al0.2NiCoSn0.5Sb1.5 to 2.2 × 10–3 W/(m·K2), which is almost twice the corresponding value reported for Ti2NiCoSnSb. Interestingly, a maximum ZT of 0.29 was found in all of the doped systems, although the transport mechanism and microstructure varied widely with the type of dopant. An optimum dopant level of 25% of Zr, 7.5% of Ta, and 10% of Al is necessary to obtain the maximum ZT in these alloys. Compared to HH systems, the HH high-entropy alloy (HEA) systems provide a larger composition field for tuning the transport properties by simultaneous doping of multiple elements to lower the thermal conductivity.
ISSN:2574-0962
2574-0962
DOI:10.1021/acsaem.3c00785