Large Chip Production Mechanism under the Extreme Load Cutting Conditions

There has existed a great deal of theory researches in term of chip production and chip breaking characteristics under conventional cutting and high speed cutting conditions,however,there isn＇t sufficient research on chip formation mechanism as well as its influence on cutting state regarding large workpieces under extreme load cutting.This paper presents a model of large saw-tooth chip through applying finite element simulation method,which gives a profound analysis about the characteristics of the extreme load cutting as well as morphology and removal of the large chip.In the meantime,a calculation formula that gives a quantitative description of the saw-tooth level regarding the large chip is established on the basis of cutting experiments on high temperature and high strength steel2.25Cr-lMo-0.25V.The cutting experiments are carried out by using the scanning electron microscope and super depth of field electron microscope to measure and calculate the large chip produced under different cutting parameters,which can verify the validity of the established model.The calculating results show that the large saw-toothed chip is produced under the squeezing action between workpiece and cutting tools.In the meanwhile,the chip develops a hardened layer where contacts the cutting tool and the saw-tooth of the chip tend to form in transverse direction.This research creates the theoretical model for large chip and performs the cutting experiments under the extreme load cutting condition,as well as analyzes the production mechanism of the large chip in the macro and micro conditions.Therefore,the proposed research could provide theoretical guidance and technical support in improving productivity and cutting technology research.