Development of ultrafine-grained 1100 aluminum alloy by cryorolling with the optimized initial heat treatment conditions
The aims of this study to determine the suitable initial heat treatment for 1100 aluminum alloy prior to cryorolling process and the properties of annealed and cryorolled annealed sample. The samples were annealed at different annealing temperature of 200˚C, 250˚C, 300˚C, 350˚C and 400˚C for 2 hours...
Gespeichert in:
| Hauptverfasser: | , , |
|---|---|
| Format: | Tagungsbericht |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | |
|---|---|
| container_issue | 1 |
| container_start_page | |
| container_title | |
| container_volume | 1756 |
| creator | Zakaria, Siti Aminah Hussain, Zuhailawati Seman, Anasyida Abu |
| description | The aims of this study to determine the suitable initial heat treatment for 1100 aluminum alloy prior to cryorolling process and the properties of annealed and cryorolled annealed sample. The samples were annealed at different annealing temperature of 200˚C, 250˚C, 300˚C, 350˚C and 400˚C for 2 hours soaking time before cryorolling. The annealing samples then were cryorolled up to 50% thickness reduction after dipping in liquid nitrogen for 30 minutes. The effect of annealing temperature on cryorolled sample was investigated by employing hardness measurements and tensile test. The highest hardness and tensile properties achieved for sample annealed at 250 °C. The entire cryorolled sample showed severely deformed grain which are elongated along and following the rolling direction. |
| doi_str_mv | 10.1063/1.4958758 |
| format | Conference Proceeding |
| fullrecord | <record><control><sourceid>proquest_scita</sourceid><recordid>TN_cdi_scitation_primary_10_1063_1_4958758</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2121743637</sourcerecordid><originalsourceid>FETCH-LOGICAL-p253t-769d021cd444286617bd301bd0cc451126a95147fe69f2d3b6142134b7461b0a3</originalsourceid><addsrcrecordid>eNp9kE9LxDAQxYMouK4e_AYBb0LXTJIm26Osf2HBi4K3krbpbpY0qWm6Wj-9XXfBm5d5A_ObmcdD6BLIDIhgNzDjWTqX6fwITSBNIZECxDGaEJLxhHL2forOum5DCM2knE_Q153eauvbRruIfY17G4OqjdPJKqhRKgxACFa2b4zrm7GxfsDFgMsw-OCtNW6FP01c47jW2LfRNOZ73DLORKMsXmsVcQxj_f1QeleNA--6c3RSK9vpi4NO0dvD_eviKVm-PD4vbpdJS1MWR_tZRSiUFeeczoUAWVSMQFGRsuQpABUqS4HLWousphUrBHAKjBeSCyiIYlN0tb_bBv_R6y7mG98HN77MKVCQnAkmR-p6T3WliWpnMG-DaVQYciD5Ltkc8kOy_8FbH_7AvK1q9gPaHnpm</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>conference_proceeding</recordtype><pqid>2121743637</pqid></control><display><type>conference_proceeding</type><title>Development of ultrafine-grained 1100 aluminum alloy by cryorolling with the optimized initial heat treatment conditions</title><source>AIP Journals Complete</source><creator>Zakaria, Siti Aminah ; Hussain, Zuhailawati ; Seman, Anasyida Abu</creator><contributor>Nazeri, Muhammad Firdaus Bin Mohd ; Ying, Lim Bee ; Idris, Mohd Sobri Bin</contributor><creatorcontrib>Zakaria, Siti Aminah ; Hussain, Zuhailawati ; Seman, Anasyida Abu ; Nazeri, Muhammad Firdaus Bin Mohd ; Ying, Lim Bee ; Idris, Mohd Sobri Bin</creatorcontrib><description>The aims of this study to determine the suitable initial heat treatment for 1100 aluminum alloy prior to cryorolling process and the properties of annealed and cryorolled annealed sample. The samples were annealed at different annealing temperature of 200˚C, 250˚C, 300˚C, 350˚C and 400˚C for 2 hours soaking time before cryorolling. The annealing samples then were cryorolled up to 50% thickness reduction after dipping in liquid nitrogen for 30 minutes. The effect of annealing temperature on cryorolled sample was investigated by employing hardness measurements and tensile test. The highest hardness and tensile properties achieved for sample annealed at 250 °C. The entire cryorolled sample showed severely deformed grain which are elongated along and following the rolling direction.</description><identifier>ISSN: 0094-243X</identifier><identifier>EISSN: 1551-7616</identifier><identifier>DOI: 10.1063/1.4958758</identifier><identifier>CODEN: APCPCS</identifier><language>eng</language><publisher>Melville: American Institute of Physics</publisher><subject>Aluminum alloys ; Aluminum base alloys ; Annealing ; Deformation ; Heat treating ; Heat treatment ; Liquid nitrogen ; Rolling direction ; Tensile properties ; Tensile tests ; Ultrafines</subject><ispartof>AIP conference proceedings, 2016, Vol.1756 (1)</ispartof><rights>Author(s)</rights><rights>2016 Author(s). Published by AIP Publishing.</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://pubs.aip.org/acp/article-lookup/doi/10.1063/1.4958758$$EHTML$$P50$$Gscitation$$H</linktohtml><link.rule.ids>309,310,314,776,780,785,786,790,4498,23909,23910,25118,27901,27902,76126</link.rule.ids></links><search><contributor>Nazeri, Muhammad Firdaus Bin Mohd</contributor><contributor>Ying, Lim Bee</contributor><contributor>Idris, Mohd Sobri Bin</contributor><creatorcontrib>Zakaria, Siti Aminah</creatorcontrib><creatorcontrib>Hussain, Zuhailawati</creatorcontrib><creatorcontrib>Seman, Anasyida Abu</creatorcontrib><title>Development of ultrafine-grained 1100 aluminum alloy by cryorolling with the optimized initial heat treatment conditions</title><title>AIP conference proceedings</title><description>The aims of this study to determine the suitable initial heat treatment for 1100 aluminum alloy prior to cryorolling process and the properties of annealed and cryorolled annealed sample. The samples were annealed at different annealing temperature of 200˚C, 250˚C, 300˚C, 350˚C and 400˚C for 2 hours soaking time before cryorolling. The annealing samples then were cryorolled up to 50% thickness reduction after dipping in liquid nitrogen for 30 minutes. The effect of annealing temperature on cryorolled sample was investigated by employing hardness measurements and tensile test. The highest hardness and tensile properties achieved for sample annealed at 250 °C. The entire cryorolled sample showed severely deformed grain which are elongated along and following the rolling direction.</description><subject>Aluminum alloys</subject><subject>Aluminum base alloys</subject><subject>Annealing</subject><subject>Deformation</subject><subject>Heat treating</subject><subject>Heat treatment</subject><subject>Liquid nitrogen</subject><subject>Rolling direction</subject><subject>Tensile properties</subject><subject>Tensile tests</subject><subject>Ultrafines</subject><issn>0094-243X</issn><issn>1551-7616</issn><fulltext>true</fulltext><rsrctype>conference_proceeding</rsrctype><creationdate>2016</creationdate><recordtype>conference_proceeding</recordtype><recordid>eNp9kE9LxDAQxYMouK4e_AYBb0LXTJIm26Osf2HBi4K3krbpbpY0qWm6Wj-9XXfBm5d5A_ObmcdD6BLIDIhgNzDjWTqX6fwITSBNIZECxDGaEJLxhHL2forOum5DCM2knE_Q153eauvbRruIfY17G4OqjdPJKqhRKgxACFa2b4zrm7GxfsDFgMsw-OCtNW6FP01c47jW2LfRNOZ73DLORKMsXmsVcQxj_f1QeleNA--6c3RSK9vpi4NO0dvD_eviKVm-PD4vbpdJS1MWR_tZRSiUFeeczoUAWVSMQFGRsuQpABUqS4HLWousphUrBHAKjBeSCyiIYlN0tb_bBv_R6y7mG98HN77MKVCQnAkmR-p6T3WliWpnMG-DaVQYciD5Ltkc8kOy_8FbH_7AvK1q9gPaHnpm</recordid><startdate>20160719</startdate><enddate>20160719</enddate><creator>Zakaria, Siti Aminah</creator><creator>Hussain, Zuhailawati</creator><creator>Seman, Anasyida Abu</creator><general>American Institute of Physics</general><scope>8FD</scope><scope>H8D</scope><scope>L7M</scope></search><sort><creationdate>20160719</creationdate><title>Development of ultrafine-grained 1100 aluminum alloy by cryorolling with the optimized initial heat treatment conditions</title><author>Zakaria, Siti Aminah ; Hussain, Zuhailawati ; Seman, Anasyida Abu</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-p253t-769d021cd444286617bd301bd0cc451126a95147fe69f2d3b6142134b7461b0a3</frbrgroupid><rsrctype>conference_proceedings</rsrctype><prefilter>conference_proceedings</prefilter><language>eng</language><creationdate>2016</creationdate><topic>Aluminum alloys</topic><topic>Aluminum base alloys</topic><topic>Annealing</topic><topic>Deformation</topic><topic>Heat treating</topic><topic>Heat treatment</topic><topic>Liquid nitrogen</topic><topic>Rolling direction</topic><topic>Tensile properties</topic><topic>Tensile tests</topic><topic>Ultrafines</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Zakaria, Siti Aminah</creatorcontrib><creatorcontrib>Hussain, Zuhailawati</creatorcontrib><creatorcontrib>Seman, Anasyida Abu</creatorcontrib><collection>Technology Research Database</collection><collection>Aerospace Database</collection><collection>Advanced Technologies Database with Aerospace</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Zakaria, Siti Aminah</au><au>Hussain, Zuhailawati</au><au>Seman, Anasyida Abu</au><au>Nazeri, Muhammad Firdaus Bin Mohd</au><au>Ying, Lim Bee</au><au>Idris, Mohd Sobri Bin</au><format>book</format><genre>proceeding</genre><ristype>CONF</ristype><atitle>Development of ultrafine-grained 1100 aluminum alloy by cryorolling with the optimized initial heat treatment conditions</atitle><btitle>AIP conference proceedings</btitle><date>2016-07-19</date><risdate>2016</risdate><volume>1756</volume><issue>1</issue><issn>0094-243X</issn><eissn>1551-7616</eissn><coden>APCPCS</coden><abstract>The aims of this study to determine the suitable initial heat treatment for 1100 aluminum alloy prior to cryorolling process and the properties of annealed and cryorolled annealed sample. The samples were annealed at different annealing temperature of 200˚C, 250˚C, 300˚C, 350˚C and 400˚C for 2 hours soaking time before cryorolling. The annealing samples then were cryorolled up to 50% thickness reduction after dipping in liquid nitrogen for 30 minutes. The effect of annealing temperature on cryorolled sample was investigated by employing hardness measurements and tensile test. The highest hardness and tensile properties achieved for sample annealed at 250 °C. The entire cryorolled sample showed severely deformed grain which are elongated along and following the rolling direction.</abstract><cop>Melville</cop><pub>American Institute of Physics</pub><doi>10.1063/1.4958758</doi><tpages>5</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0094-243X |
| ispartof | AIP conference proceedings, 2016, Vol.1756 (1) |
| issn | 0094-243X 1551-7616 |
| language | eng |
| recordid | cdi_scitation_primary_10_1063_1_4958758 |
| source | AIP Journals Complete |
| subjects | Aluminum alloys Aluminum base alloys Annealing Deformation Heat treating Heat treatment Liquid nitrogen Rolling direction Tensile properties Tensile tests Ultrafines |
| title | Development of ultrafine-grained 1100 aluminum alloy by cryorolling with the optimized initial heat treatment conditions |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-10T00%3A20%3A07IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_scita&rft_val_fmt=info:ofi/fmt:kev:mtx:book&rft.genre=proceeding&rft.atitle=Development%20of%20ultrafine-grained%201100%20aluminum%20alloy%20by%20cryorolling%20with%20the%20optimized%20initial%20heat%20treatment%20conditions&rft.btitle=AIP%20conference%20proceedings&rft.au=Zakaria,%20Siti%20Aminah&rft.date=2016-07-19&rft.volume=1756&rft.issue=1&rft.issn=0094-243X&rft.eissn=1551-7616&rft.coden=APCPCS&rft_id=info:doi/10.1063/1.4958758&rft_dat=%3Cproquest_scita%3E2121743637%3C/proquest_scita%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2121743637&rft_id=info:pmid/&rfr_iscdi=true |