Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method

Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method

The longitudinal residual stresses in the friction stir-welded plates of 5A06 aluminium and pure copper were determined using the contour method. The results revealed the presence of high tensile and compressive residual stresses on the aluminium and copper sides, respectively. The residual stresses...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Science and technology of welding and joining 2018-07, Vol.23 (5), p.394-399
Hauptverfasser: Zhang, Chengcong, Shirzadi, Amir A.
Format: Artikel
Sprache:eng
Schlagworte:
aluminium copper joints
contour method
Friction stir welding
residual stress
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 399
container_issue 5
container_start_page 394
container_title Science and technology of welding and joining
container_volume 23
creator Zhang, Chengcong
Shirzadi, Amir A.
description The longitudinal residual stresses in the friction stir-welded plates of 5A06 aluminium and pure copper were determined using the contour method. The results revealed the presence of high tensile and compressive residual stresses on the aluminium and copper sides, respectively. The residual stresses were detected on the weld zone as well as the thermo-mechanically affected zone (TMAZ) of the aluminium plate. In contrast, the compressive residual stresses in the copper plate had a much narrower width along the weld line. Peak tensile stresses up to 240 MPa were found in the TMAZ of the aluminium plate.
doi_str_mv 10.1080/13621718.2017.1402846
format Article
fullrecord <record><control><sourceid>sage_infor</sourceid><recordid>TN_cdi_sage_journals_10_1080_13621718_2017_1402846</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sage_id>10.1080_13621718.2017.1402846</sage_id><sourcerecordid>10.1080_13621718.2017.1402846</sourcerecordid><originalsourceid>FETCH-LOGICAL-c400t-71e3892df9e9c66fbe76e165a156116038c31d4b057f43d7f36b6b61a29a9223</originalsourceid><addsrcrecordid>eNqFkE1qwzAQhU1poSHNEQq6gFON5Mj2riX0D1K6yV4o1ihRsaUgyaS5fRWSbltmMY-Z9w3DK4p7oHOgDX0ALhjU0MwZhXoOFWVNJa6KCdQVL1nLxXXW2VOeTLfFLEa7ocAZqzivJsX3B6o4BhzQJeINCRitHlVPYsoyYiTWEW0zNdheBWKC7ZL1Lu9tKA_Ya9RE9eNgnR0Hopwmnd_vMZB9r1LGx2jdlqQd5rlLfgxkwLTz-q64MaqPOLv0abF-eV4v38rV5-v78mlVdhWlqawBedMybVpsOyHMBmuBIBYKFgJAUN50HHS1oYvaVFzXhotNLlCsVS1jfFoszme74GMMaOQ-2EGFowQqTwHK3wDlKUB5CTBz7MxFtUX5lf92-ct_occzZJ3xYVAHH3otkzr2PpigXGej5H-f-AEuBog0</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method</title><source>Access via SAGE</source><creator>Zhang, Chengcong ; Shirzadi, Amir A.</creator><creatorcontrib>Zhang, Chengcong ; Shirzadi, Amir A.</creatorcontrib><description>The longitudinal residual stresses in the friction stir-welded plates of 5A06 aluminium and pure copper were determined using the contour method. The results revealed the presence of high tensile and compressive residual stresses on the aluminium and copper sides, respectively. The residual stresses were detected on the weld zone as well as the thermo-mechanically affected zone (TMAZ) of the aluminium plate. In contrast, the compressive residual stresses in the copper plate had a much narrower width along the weld line. Peak tensile stresses up to 240 MPa were found in the TMAZ of the aluminium plate.</description><identifier>ISSN: 1362-1718</identifier><identifier>EISSN: 1743-2936</identifier><identifier>DOI: 10.1080/13621718.2017.1402846</identifier><language>eng</language><publisher>London, England: Taylor &amp; Francis</publisher><subject>aluminium copper joints ; contour method ; Friction stir welding ; residual stress</subject><ispartof>Science and technology of welding and joining, 2018-07, Vol.23 (5), p.394-399</ispartof><rights>2017 The Author(s). Published by Informa UK Limited, trading as Taylor &amp; Francis Group 2017</rights><rights>2017 The Author(s). Published by Informa UK Limited, trading as Taylor &amp; Francis Group</rights><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c400t-71e3892df9e9c66fbe76e165a156116038c31d4b057f43d7f36b6b61a29a9223</citedby><cites>FETCH-LOGICAL-c400t-71e3892df9e9c66fbe76e165a156116038c31d4b057f43d7f36b6b61a29a9223</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://journals.sagepub.com/doi/pdf/10.1080/13621718.2017.1402846$$EPDF$$P50$$Gsage$$Hfree_for_read</linktopdf><linktohtml>$$Uhttps://journals.sagepub.com/doi/10.1080/13621718.2017.1402846$$EHTML$$P50$$Gsage$$Hfree_for_read</linktohtml><link.rule.ids>314,780,784,21819,27924,27925,43621,43622</link.rule.ids></links><search><creatorcontrib>Zhang, Chengcong</creatorcontrib><creatorcontrib>Shirzadi, Amir A.</creatorcontrib><title>Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method</title><title>Science and technology of welding and joining</title><description>The longitudinal residual stresses in the friction stir-welded plates of 5A06 aluminium and pure copper were determined using the contour method. The results revealed the presence of high tensile and compressive residual stresses on the aluminium and copper sides, respectively. The residual stresses were detected on the weld zone as well as the thermo-mechanically affected zone (TMAZ) of the aluminium plate. In contrast, the compressive residual stresses in the copper plate had a much narrower width along the weld line. Peak tensile stresses up to 240 MPa were found in the TMAZ of the aluminium plate.</description><subject>aluminium copper joints</subject><subject>contour method</subject><subject>Friction stir welding</subject><subject>residual stress</subject><issn>1362-1718</issn><issn>1743-2936</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2018</creationdate><recordtype>article</recordtype><sourceid>0YH</sourceid><sourceid>AFRWT</sourceid><recordid>eNqFkE1qwzAQhU1poSHNEQq6gFON5Mj2riX0D1K6yV4o1ihRsaUgyaS5fRWSbltmMY-Z9w3DK4p7oHOgDX0ALhjU0MwZhXoOFWVNJa6KCdQVL1nLxXXW2VOeTLfFLEa7ocAZqzivJsX3B6o4BhzQJeINCRitHlVPYsoyYiTWEW0zNdheBWKC7ZL1Lu9tKA_Ya9RE9eNgnR0Hopwmnd_vMZB9r1LGx2jdlqQd5rlLfgxkwLTz-q64MaqPOLv0abF-eV4v38rV5-v78mlVdhWlqawBedMybVpsOyHMBmuBIBYKFgJAUN50HHS1oYvaVFzXhotNLlCsVS1jfFoszme74GMMaOQ-2EGFowQqTwHK3wDlKUB5CTBz7MxFtUX5lf92-ct_occzZJ3xYVAHH3otkzr2PpigXGej5H-f-AEuBog0</recordid><startdate>20180704</startdate><enddate>20180704</enddate><creator>Zhang, Chengcong</creator><creator>Shirzadi, Amir A.</creator><general>Taylor &amp; Francis</general><general>SAGE Publications</general><scope>0YH</scope><scope>AFRWT</scope><scope>AAYXX</scope><scope>CITATION</scope></search><sort><creationdate>20180704</creationdate><title>Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method</title><author>Zhang, Chengcong ; Shirzadi, Amir A.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c400t-71e3892df9e9c66fbe76e165a156116038c31d4b057f43d7f36b6b61a29a9223</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2018</creationdate><topic>aluminium copper joints</topic><topic>contour method</topic><topic>Friction stir welding</topic><topic>residual stress</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Zhang, Chengcong</creatorcontrib><creatorcontrib>Shirzadi, Amir A.</creatorcontrib><collection>Access via Taylor &amp; Francis (Open Access Collection)</collection><collection>Sage Journals GOLD Open Access 2024</collection><collection>CrossRef</collection><jtitle>Science and technology of welding and joining</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Zhang, Chengcong</au><au>Shirzadi, Amir A.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method</atitle><jtitle>Science and technology of welding and joining</jtitle><date>2018-07-04</date><risdate>2018</risdate><volume>23</volume><issue>5</issue><spage>394</spage><epage>399</epage><pages>394-399</pages><issn>1362-1718</issn><eissn>1743-2936</eissn><abstract>The longitudinal residual stresses in the friction stir-welded plates of 5A06 aluminium and pure copper were determined using the contour method. The results revealed the presence of high tensile and compressive residual stresses on the aluminium and copper sides, respectively. The residual stresses were detected on the weld zone as well as the thermo-mechanically affected zone (TMAZ) of the aluminium plate. In contrast, the compressive residual stresses in the copper plate had a much narrower width along the weld line. Peak tensile stresses up to 240 MPa were found in the TMAZ of the aluminium plate.</abstract><cop>London, England</cop><pub>Taylor &amp; Francis</pub><doi>10.1080/13621718.2017.1402846</doi><tpages>6</tpages><oa>free_for_read</oa></addata></record>
fulltext fulltext
identifier ISSN: 1362-1718
ispartof Science and technology of welding and joining, 2018-07, Vol.23 (5), p.394-399
issn 1362-1718
1743-2936
language eng
recordid cdi_sage_journals_10_1080_13621718_2017_1402846
source Access via SAGE
subjects aluminium copper joints
contour method
Friction stir welding
residual stress
title Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-25T21%3A44%3A14IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-sage_infor&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Measurement%20of%20residual%20stresses%20in%20dissimilar%20friction%20stir-welded%20aluminium%20and%20copper%20plates%20using%20the%20contour%20method&rft.jtitle=Science%20and%20technology%20of%20welding%20and%20joining&rft.au=Zhang,%20Chengcong&rft.date=2018-07-04&rft.volume=23&rft.issue=5&rft.spage=394&rft.epage=399&rft.pages=394-399&rft.issn=1362-1718&rft.eissn=1743-2936&rft_id=info:doi/10.1080/13621718.2017.1402846&rft_dat=%3Csage_infor%3E10.1080_13621718.2017.1402846%3C/sage_infor%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rft_sage_id=10.1080_13621718.2017.1402846&rfr_iscdi=true