Damage evolution law and failure mechanism of rock impacted by high-pressure water jet under in-situ stress condition
To investigate the real physical mechanism of rock fragmentation subjected to water jet under in-situ stress condition, a numerical model based on the SPH algorithm was established using the rate-dependent constitutive model to simulate the rock-breaking process. First, the damage evolution law of r...
Gespeichert in:
Veröffentlicht in: | Science progress (1916) 2023-07, Vol.106 (3), p.368504231188618-368504231188618 |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | To investigate the real physical mechanism of rock fragmentation subjected to water jet under in-situ stress condition, a numerical model based on the SPH algorithm was established using the rate-dependent constitutive model to simulate the rock-breaking process. First, the damage evolution law of rock impacted by high-pressure water jet under in-situ stress conditions was studied by analyzing the distribution characteristics of the damage field in the dynamic process of water jet impinging. The results showed that the damage field, widths of surface damage, maximum widths of damage and mean depths of damage of rock decreased with the increase of in-situ stress, indicating that the existence of initial in-situ stress had a strong inhibitory effect on rock fragmentation. The attenuation of the maximum widths of damage could be divided into two stages. The mean depths of damage of rock played a leading role in the number of damage elements. Furthermore, on this basis, the real physical mechanism of rock fragmentation subjected to water jet under in-situ stress condition was revealed by analyzing the stress states and damage history variables of the particles in the selected five typical regions. The study showed that the failure type of the upper rock elements in the crushing zone was brittle failure caused by a combination of compressive stress and shear stress with or without in-situ stress. However, the failure mechanisms of rock elements in crack zone were completely different with or without in-situ stress. In the absence of in-situ stress, the failure type of rock impacted by water jet was the coexistence of damage caused by compressive-shear stress and tensile stress, while in the presence of in-situ stress, the failure type of rock impacted by water jet was mainly the damage caused by compressive-shear stress. |
---|---|
ISSN: | 0036-8504 2047-7163 |
DOI: | 10.1177/00368504231188618 |