Hip Abduction Can Be Considered the Sole Posterior Precaution Strategy to Lower the Rate of Impingement After Posterior Approach Total Hip Arthroplasty With Large Femoral Head: A Computer Simulation Study

Studies suggest that posterior hip precautions are unnecessary after total hip arthroplasty; however, many surgeons and patients choose to follow these precautions to some extent. In this study, we hypothesized that 20° of hip abduction would be sufficient to prevent impingement and dislocation in motions requiring hip flexion when using larger prosthetic heads (≥36 mm) when the acetabular implant is placed within a reasonable orientation (anteversion:15-25° and inclination: 40-60°). Using a robotic hip platform, we investigated the effect of hip abduction on prosthetic and bony impingement in 43 patients. For the flexed seated position, anterior pelvic tilt angles of 10 and 20° were chosen, while anterior pelvic tilt angles of 70 and 90° were chosen for the bending forward position. An additional 10° of hip external rotation and 10 or 20° of hip internal rotation were also added to the simulation. One hip received a 32-mm head; otherwise, 36-, 40-mm, or dual-mobility heads were used. The study power was 0.99, and the effect size was 0.644. In 65% of the cases, bone-bone impingement between the calcar and anterior-inferior iliac spine was the main type of impingement. The absolute risk of impingement decreased between 0 and 16.3% in both tested positions with the addition of 20° hip abduction. With modern primary total hip arthroplasty stems (low neck diameter) and an overall acceptable cup anteversion angle, small degrees of hip abduction may be the only posterior hip precaution strategy required to lower the risk of dislocation among patients. Future studies can potentially investigate the concept of personalized hip precautions based on preoperative computer simulations, utilized implants, hip-spine relations, and final implant orientation.