Equilibrium and Kinetic Characteristic of Adsorption of Cu super(2+), Pb super(2+) on a Novel Anionic Starch Microspheres

Neutral starch microspheres (NSMs) were synthesized with epichlorohydrin as the cross-linking agent from soluble starch by inverse microemulsion method. Anionic starch microspheres (ASMs) were prepared from NSMs by the secondary polymerization with chloroacetic acid as the anionic etherifying agent....

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Water, air, and soil pollution air, and soil pollution, 2011-07, Vol.219 (1-4), p.103-112
Hauptverfasser: Yang, YaTi, Wei, XiuZhi, Wan, JuanMin, Meng, ZhaoFu
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Neutral starch microspheres (NSMs) were synthesized with epichlorohydrin as the cross-linking agent from soluble starch by inverse microemulsion method. Anionic starch microspheres (ASMs) were prepared from NSMs by the secondary polymerization with chloroacetic acid as the anionic etherifying agent. Scanning electron microscopy (SEM) revealed that microspheres had good sphericity and fine dispersibility, and the average particle size was about 75 mu m. The adsorption procedure of Cu super(2+), Pb super(2+) on ASMs was carried out by batch experiments, Langmuir and Freundlich adsorption models were applied to describe the experimental isotherms, the adsorption equilibrium data were found to fit the Langmuir and Freundlich isotherm model, the Freundlich isotherm was more adequate than the Langmuir isotherm in simulating the adsorption isotherm of Cu super(2+),the adsorption of Cu super(2+), Pb super(2+) on ASMs was a spontaneous, the isosteric heat of adsorption at different adsorption levels was always negative and indicative of an exothermic process. The pseudo first- and second-order kinetic models were used to describe the kinetic data, and the rate constants were evaluated. The experimental data fitted well to the second-order kinetic model, which indicated that the chemical sorption was the rate-limiting step, instead of mass transfer.
ISSN:0049-6979
1573-2932
DOI:10.1007/s11270-010-0690-8