Development of a simulator for use in the measurement of chain saw vibration
The measurement of vibration production of light, hand held power tools is important in the assessment of the potential for elicitation of vibration injury to the operators of these tools. The manner in which these measurements are made can greatly affect the results. The measured vibration producti...
Gespeichert in:
| Veröffentlicht in: | Applied ergonomics 1977-09, Vol.8 (3), p.130-134 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | eng |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 134 |
|---|---|
| container_issue | 3 |
| container_start_page | 130 |
| container_title | Applied ergonomics |
| container_volume | 8 |
| creator | Abrams, C.F. Suggs, C.W. |
| description | The measurement of vibration production of light, hand held power tools is important in the assessment of the potential for elicitation of vibration injury to the operators of these tools. The manner in which these measurements are made can greatly affect the results. The measured vibration production of the tool becomes a function of the operator holding the saw during the measurement and his physical characteristics.
The objective of the work reported here was to develop a simulator of the operator which might be used in the vibration production analysis of chain saws. The operator was modelled in terms of the driving point mechanical impedance characteristics of humans for input to the hands. A simulator was developed based on the driving point impedance characterization of the operator and evaluated with chain saw vibration measurements. |
| doi_str_mv | 10.1016/0003-6870(77)90001-1 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_83833436</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>0003687077900011</els_id><sourcerecordid>83833436</sourcerecordid><originalsourceid>FETCH-LOGICAL-c358t-a7598df07e60fb84911003374878595bb8f9a1a844fd398a5ff8234ecd9c69453</originalsourceid><addsrcrecordid>eNp9kE1PAyEQhonRaK3-A2P2ZPSwCgsscDEx9TNp4kXPhGWHFLMfFXZr_PdSW_XmgZAJzzszPAidEHxJMCmvMMY0L6XA50JcqFSRnOygCZGiyBUpyl00-UUO0GGMb6mUjPB9dEB4KURB-QTNb2EFTb9soRuy3mUmi74dGzP0IXPpjBEy32XDArIWTBwD_JB2YdJDNB_ZylfBDL7vjtCeM02E4-09Ra_3dy-zx3z-_PA0u5nnlnI55EZwJWuHBZTYVZIpQtKiVDApJFe8qqRThhjJmKupkoY7JwvKwNbKlopxOkVnm77L0L-PEAfd-mihaUwH_Ri1pJJSRssEsg1oQx9jAKeXwbcmfGqC9dqiXivSa0VaCP1tUZMUO932H6sW6r_QVlsCrjcApF-uPAQdrYfOQu0D2EHXvf9_whe3OIAd</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>83833436</pqid></control><display><type>article</type><title>Development of a simulator for use in the measurement of chain saw vibration</title><source>Access via ScienceDirect (Elsevier)</source><creator>Abrams, C.F. ; Suggs, C.W.</creator><creatorcontrib>Abrams, C.F. ; Suggs, C.W.</creatorcontrib><description>The measurement of vibration production of light, hand held power tools is important in the assessment of the potential for elicitation of vibration injury to the operators of these tools. The manner in which these measurements are made can greatly affect the results. The measured vibration production of the tool becomes a function of the operator holding the saw during the measurement and his physical characteristics.
The objective of the work reported here was to develop a simulator of the operator which might be used in the vibration production analysis of chain saws. The operator was modelled in terms of the driving point mechanical impedance characteristics of humans for input to the hands. A simulator was developed based on the driving point impedance characterization of the operator and evaluated with chain saw vibration measurements.</description><identifier>ISSN: 0003-6870</identifier><identifier>EISSN: 1872-9126</identifier><identifier>DOI: 10.1016/0003-6870(77)90001-1</identifier><identifier>PMID: 15677235</identifier><language>eng</language><publisher>England: Elsevier Ltd</publisher><ispartof>Applied ergonomics, 1977-09, Vol.8 (3), p.130-134</ispartof><rights>1977</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c358t-a7598df07e60fb84911003374878595bb8f9a1a844fd398a5ff8234ecd9c69453</citedby><cites>FETCH-LOGICAL-c358t-a7598df07e60fb84911003374878595bb8f9a1a844fd398a5ff8234ecd9c69453</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/0003-6870(77)90001-1$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,780,784,3550,27924,27925,45995</link.rule.ids><backlink>$$Uhttps://www.ncbi.nlm.nih.gov/pubmed/15677235$$D View this record in MEDLINE/PubMed$$Hfree_for_read</backlink></links><search><creatorcontrib>Abrams, C.F.</creatorcontrib><creatorcontrib>Suggs, C.W.</creatorcontrib><title>Development of a simulator for use in the measurement of chain saw vibration</title><title>Applied ergonomics</title><addtitle>Appl Ergon</addtitle><description>The measurement of vibration production of light, hand held power tools is important in the assessment of the potential for elicitation of vibration injury to the operators of these tools. The manner in which these measurements are made can greatly affect the results. The measured vibration production of the tool becomes a function of the operator holding the saw during the measurement and his physical characteristics.
The objective of the work reported here was to develop a simulator of the operator which might be used in the vibration production analysis of chain saws. The operator was modelled in terms of the driving point mechanical impedance characteristics of humans for input to the hands. A simulator was developed based on the driving point impedance characterization of the operator and evaluated with chain saw vibration measurements.</description><issn>0003-6870</issn><issn>1872-9126</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1977</creationdate><recordtype>article</recordtype><recordid>eNp9kE1PAyEQhonRaK3-A2P2ZPSwCgsscDEx9TNp4kXPhGWHFLMfFXZr_PdSW_XmgZAJzzszPAidEHxJMCmvMMY0L6XA50JcqFSRnOygCZGiyBUpyl00-UUO0GGMb6mUjPB9dEB4KURB-QTNb2EFTb9soRuy3mUmi74dGzP0IXPpjBEy32XDArIWTBwD_JB2YdJDNB_ZylfBDL7vjtCeM02E4-09Ra_3dy-zx3z-_PA0u5nnlnI55EZwJWuHBZTYVZIpQtKiVDApJFe8qqRThhjJmKupkoY7JwvKwNbKlopxOkVnm77L0L-PEAfd-mihaUwH_Ri1pJJSRssEsg1oQx9jAKeXwbcmfGqC9dqiXivSa0VaCP1tUZMUO932H6sW6r_QVlsCrjcApF-uPAQdrYfOQu0D2EHXvf9_whe3OIAd</recordid><startdate>197709</startdate><enddate>197709</enddate><creator>Abrams, C.F.</creator><creator>Suggs, C.W.</creator><general>Elsevier Ltd</general><scope>NPM</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7X8</scope></search><sort><creationdate>197709</creationdate><title>Development of a simulator for use in the measurement of chain saw vibration</title><author>Abrams, C.F. ; Suggs, C.W.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c358t-a7598df07e60fb84911003374878595bb8f9a1a844fd398a5ff8234ecd9c69453</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>1977</creationdate><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Abrams, C.F.</creatorcontrib><creatorcontrib>Suggs, C.W.</creatorcontrib><collection>PubMed</collection><collection>CrossRef</collection><collection>MEDLINE - Academic</collection><jtitle>Applied ergonomics</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Abrams, C.F.</au><au>Suggs, C.W.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Development of a simulator for use in the measurement of chain saw vibration</atitle><jtitle>Applied ergonomics</jtitle><addtitle>Appl Ergon</addtitle><date>1977-09</date><risdate>1977</risdate><volume>8</volume><issue>3</issue><spage>130</spage><epage>134</epage><pages>130-134</pages><issn>0003-6870</issn><eissn>1872-9126</eissn><abstract>The measurement of vibration production of light, hand held power tools is important in the assessment of the potential for elicitation of vibration injury to the operators of these tools. The manner in which these measurements are made can greatly affect the results. The measured vibration production of the tool becomes a function of the operator holding the saw during the measurement and his physical characteristics.
The objective of the work reported here was to develop a simulator of the operator which might be used in the vibration production analysis of chain saws. The operator was modelled in terms of the driving point mechanical impedance characteristics of humans for input to the hands. A simulator was developed based on the driving point impedance characterization of the operator and evaluated with chain saw vibration measurements.</abstract><cop>England</cop><pub>Elsevier Ltd</pub><pmid>15677235</pmid><doi>10.1016/0003-6870(77)90001-1</doi><tpages>5</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0003-6870 |
| ispartof | Applied ergonomics, 1977-09, Vol.8 (3), p.130-134 |
| issn | 0003-6870 1872-9126 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_83833436 |
| source | Access via ScienceDirect (Elsevier) |
| title | Development of a simulator for use in the measurement of chain saw vibration |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-19T18%3A00%3A33IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Development%20of%20a%20simulator%20for%20use%20in%20the%20measurement%20of%20chain%20saw%20vibration&rft.jtitle=Applied%20ergonomics&rft.au=Abrams,%20C.F.&rft.date=1977-09&rft.volume=8&rft.issue=3&rft.spage=130&rft.epage=134&rft.pages=130-134&rft.issn=0003-6870&rft.eissn=1872-9126&rft_id=info:doi/10.1016/0003-6870(77)90001-1&rft_dat=%3Cproquest_cross%3E83833436%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=83833436&rft_id=info:pmid/15677235&rft_els_id=0003687077900011&rfr_iscdi=true |