External skeletal fixation in the management of equine mandibular fractures: 16 cases (1988-1998)

Summary Fifty‐three cases of equine mandibular fractures were managed surgically from 1988–1998, of which 16 (30%) were repaired by external skeletal fixation (ESF). Three surgical methods were utilised: transmandibular 4.76 or 6.35 mm Steinmann pins incorporated into fibreglass casting material or nonsterile dental acrylic (methyl methacrylate ‐ MMA) bars reinforced with steel; transmandibular 9.6 mm self‐tapping threaded pins ± 4.76 or 6.35 mm Steinmann pins incorporated into MMA bars reinforced with steel; and 4.5 mm or 5.5 mm ASIF cortical bone screws incorporated into MMA bars reinforced with steel or a ventral MMA splint. Fourteen horses were presented to the hospital for fixator removal at an average of 56.2 days. At removal, fractures were stable and occlusion of incisor and cheek teeth was considered adequate. Complications of the procedure occurred in 3 horses. Two horses with persistent drainage and ring sequestra from pin tracts required curettage 4 or 5 months after ESF removal. A third horse required replacement of the original fibreglass ESF with MMA bars to regain access to open, infected wounds. Another horse required removal of the second premolar at the time of fixator removal because the tooth root had been damaged in the original injury. ESF for the surgical management of mandibular fractures in horses has produced good results, with incisive and cheek tooth alignment reestablished in all horses. Horses that were managed via ESF had a rapid return to full feed and did not require any supplementation via nasogastric tube or oesophagostomy to maintain bodyweight or hydration status.