High temperature fretting fatigue behavior of IN100
Fretting fatigue behavior of a nickel-base superalloy, IN100, was investigated at 600 °C. Fretting fatigue tests were conducted at various stress levels using cylinder-on-flat contact configuration. Effects of microstructure were also investigated by varying the gamma grain size (3 μm versus 7 μm)....
Gespeichert in:
| Veröffentlicht in: | International journal of fatigue 2010-08, Vol.32 (8), p.1289-1298 |
|---|---|
| Hauptverfasser: | , , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 1298 |
|---|---|
| container_issue | 8 |
| container_start_page | 1289 |
| container_title | International journal of fatigue |
| container_volume | 32 |
| creator | Mall, S. Kim, H.-K. Porter, W.J. Ownby, J.F. Traylor, A.G. |
| description | Fretting fatigue behavior of a nickel-base superalloy, IN100, was investigated at 600
°C. Fretting fatigue tests were conducted at various stress levels using cylinder-on-flat contact configuration. Effects of microstructure were also investigated by varying the gamma grain size (3
μm versus 7
μm). Additionally, effects of contact load were studied. Furthermore, plain fatigue tests of IN100 with two microstructures were also conducted. Fretting reduced the strength/life in comparison to those of the plain fatigue almost equally in both microstructures. Increase of contact load reduced the fretting fatigue strength/life. An increase of the gamma grain size decreased the fretting fatigue strength/life of IN100. Fracture surfaces of the 3
μm grain microstructure showed intergranular and tortuous crack path while the 7
μm grain microstructure had transgranular and relatively smoother crack path. Fractographic analysis indicated that the 3
μm grain microstructure had a higher resistance to the fretting fatigue crack nucleation and initiation as well as to the crack growth in comparison to the 7
μm grain microstructure, which was in agreement with the observed plain and fretting fatigue behaviors. Furthermore, plain and fretting fatigue performances improved at 600
°C in comparison to room temperature with both microstructures. |
| doi_str_mv | 10.1016/j.ijfatigue.2010.01.012 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_753751691</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0142112310000253</els_id><sourcerecordid>753751691</sourcerecordid><originalsourceid>FETCH-LOGICAL-c377t-253998e00652704c30dbea4a5afb3c3a7d1cb2158bf3a819cb33b48f2dfa4d423</originalsourceid><addsrcrecordid>eNqFkE9Lw0AQxRdRsFY_g7mIp9TZP8kmx1LUFope9LxsNrPthjSpu5uC396Ull6FBwPDb95jHiGPFGYUaP7SzFxjdXSbAWcMxi3QUeyKTGghy5SLjF2TCVDBUkoZvyV3ITQAUILMJoQv3WabRNzt0es4eEysxxhdt0nOpkmFW31wvU96m6w-KMA9ubG6DfhwnlPy_fb6tVim68_31WK-Tg2XMqYs42VZIECeMQnCcKgr1EJn2lbccC1raipGs6KyXBe0NBXnlSgsq60WtWB8Sp5Pvnvf_wwYotq5YLBtdYf9EJTMuMxoXtKRlCfS-D4Ej1btvdtp_6soqGNLqlGXltSxJQV01DHj6Zyhg9Gt9bozLlzOGc-55IUYufmJw_Hhg0OvgnHYGaydRxNV3bt_s_4Aks2AdA</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>753751691</pqid></control><display><type>article</type><title>High temperature fretting fatigue behavior of IN100</title><source>Elsevier ScienceDirect Journals</source><creator>Mall, S. ; Kim, H.-K. ; Porter, W.J. ; Ownby, J.F. ; Traylor, A.G.</creator><creatorcontrib>Mall, S. ; Kim, H.-K. ; Porter, W.J. ; Ownby, J.F. ; Traylor, A.G.</creatorcontrib><description>Fretting fatigue behavior of a nickel-base superalloy, IN100, was investigated at 600
°C. Fretting fatigue tests were conducted at various stress levels using cylinder-on-flat contact configuration. Effects of microstructure were also investigated by varying the gamma grain size (3
μm versus 7
μm). Additionally, effects of contact load were studied. Furthermore, plain fatigue tests of IN100 with two microstructures were also conducted. Fretting reduced the strength/life in comparison to those of the plain fatigue almost equally in both microstructures. Increase of contact load reduced the fretting fatigue strength/life. An increase of the gamma grain size decreased the fretting fatigue strength/life of IN100. Fracture surfaces of the 3
μm grain microstructure showed intergranular and tortuous crack path while the 7
μm grain microstructure had transgranular and relatively smoother crack path. Fractographic analysis indicated that the 3
μm grain microstructure had a higher resistance to the fretting fatigue crack nucleation and initiation as well as to the crack growth in comparison to the 7
μm grain microstructure, which was in agreement with the observed plain and fretting fatigue behaviors. Furthermore, plain and fretting fatigue performances improved at 600
°C in comparison to room temperature with both microstructures.</description><identifier>ISSN: 0142-1123</identifier><identifier>EISSN: 1879-3452</identifier><identifier>DOI: 10.1016/j.ijfatigue.2010.01.012</identifier><identifier>CODEN: IJFADB</identifier><language>eng</language><publisher>Kidlington: Elsevier Ltd</publisher><subject>Applied sciences ; Contact load ; Crack initiation ; Crack propagation ; Cylinders ; Elevated temperature ; Exact sciences and technology ; Fatigue ; Fatigue (materials) ; Fatigue tests ; Fracture mechanics ; Fretting ; Grains ; IN100 ; Mechanical properties and methods of testing. Rheology. Fracture mechanics. Tribology ; Metals. Metallurgy ; Microstructure ; Strength</subject><ispartof>International journal of fatigue, 2010-08, Vol.32 (8), p.1289-1298</ispartof><rights>2010</rights><rights>2015 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c377t-253998e00652704c30dbea4a5afb3c3a7d1cb2158bf3a819cb33b48f2dfa4d423</citedby></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://www.sciencedirect.com/science/article/pii/S0142112310000253$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,776,780,3537,27901,27902,65534</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=23637384$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Mall, S.</creatorcontrib><creatorcontrib>Kim, H.-K.</creatorcontrib><creatorcontrib>Porter, W.J.</creatorcontrib><creatorcontrib>Ownby, J.F.</creatorcontrib><creatorcontrib>Traylor, A.G.</creatorcontrib><title>High temperature fretting fatigue behavior of IN100</title><title>International journal of fatigue</title><description>Fretting fatigue behavior of a nickel-base superalloy, IN100, was investigated at 600
°C. Fretting fatigue tests were conducted at various stress levels using cylinder-on-flat contact configuration. Effects of microstructure were also investigated by varying the gamma grain size (3
μm versus 7
μm). Additionally, effects of contact load were studied. Furthermore, plain fatigue tests of IN100 with two microstructures were also conducted. Fretting reduced the strength/life in comparison to those of the plain fatigue almost equally in both microstructures. Increase of contact load reduced the fretting fatigue strength/life. An increase of the gamma grain size decreased the fretting fatigue strength/life of IN100. Fracture surfaces of the 3
μm grain microstructure showed intergranular and tortuous crack path while the 7
μm grain microstructure had transgranular and relatively smoother crack path. Fractographic analysis indicated that the 3
μm grain microstructure had a higher resistance to the fretting fatigue crack nucleation and initiation as well as to the crack growth in comparison to the 7
μm grain microstructure, which was in agreement with the observed plain and fretting fatigue behaviors. Furthermore, plain and fretting fatigue performances improved at 600
°C in comparison to room temperature with both microstructures.</description><subject>Applied sciences</subject><subject>Contact load</subject><subject>Crack initiation</subject><subject>Crack propagation</subject><subject>Cylinders</subject><subject>Elevated temperature</subject><subject>Exact sciences and technology</subject><subject>Fatigue</subject><subject>Fatigue (materials)</subject><subject>Fatigue tests</subject><subject>Fracture mechanics</subject><subject>Fretting</subject><subject>Grains</subject><subject>IN100</subject><subject>Mechanical properties and methods of testing. Rheology. Fracture mechanics. Tribology</subject><subject>Metals. Metallurgy</subject><subject>Microstructure</subject><subject>Strength</subject><issn>0142-1123</issn><issn>1879-3452</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2010</creationdate><recordtype>article</recordtype><recordid>eNqFkE9Lw0AQxRdRsFY_g7mIp9TZP8kmx1LUFope9LxsNrPthjSpu5uC396Ull6FBwPDb95jHiGPFGYUaP7SzFxjdXSbAWcMxi3QUeyKTGghy5SLjF2TCVDBUkoZvyV3ITQAUILMJoQv3WabRNzt0es4eEysxxhdt0nOpkmFW31wvU96m6w-KMA9ubG6DfhwnlPy_fb6tVim68_31WK-Tg2XMqYs42VZIECeMQnCcKgr1EJn2lbccC1raipGs6KyXBe0NBXnlSgsq60WtWB8Sp5Pvnvf_wwYotq5YLBtdYf9EJTMuMxoXtKRlCfS-D4Ej1btvdtp_6soqGNLqlGXltSxJQV01DHj6Zyhg9Gt9bozLlzOGc-55IUYufmJw_Hhg0OvgnHYGaydRxNV3bt_s_4Aks2AdA</recordid><startdate>20100801</startdate><enddate>20100801</enddate><creator>Mall, S.</creator><creator>Kim, H.-K.</creator><creator>Porter, W.J.</creator><creator>Ownby, J.F.</creator><creator>Traylor, A.G.</creator><general>Elsevier Ltd</general><general>Elsevier</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>20100801</creationdate><title>High temperature fretting fatigue behavior of IN100</title><author>Mall, S. ; Kim, H.-K. ; Porter, W.J. ; Ownby, J.F. ; Traylor, A.G.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c377t-253998e00652704c30dbea4a5afb3c3a7d1cb2158bf3a819cb33b48f2dfa4d423</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2010</creationdate><topic>Applied sciences</topic><topic>Contact load</topic><topic>Crack initiation</topic><topic>Crack propagation</topic><topic>Cylinders</topic><topic>Elevated temperature</topic><topic>Exact sciences and technology</topic><topic>Fatigue</topic><topic>Fatigue (materials)</topic><topic>Fatigue tests</topic><topic>Fracture mechanics</topic><topic>Fretting</topic><topic>Grains</topic><topic>IN100</topic><topic>Mechanical properties and methods of testing. Rheology. Fracture mechanics. Tribology</topic><topic>Metals. Metallurgy</topic><topic>Microstructure</topic><topic>Strength</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Mall, S.</creatorcontrib><creatorcontrib>Kim, H.-K.</creatorcontrib><creatorcontrib>Porter, W.J.</creatorcontrib><creatorcontrib>Ownby, J.F.</creatorcontrib><creatorcontrib>Traylor, A.G.</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>International journal of fatigue</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Mall, S.</au><au>Kim, H.-K.</au><au>Porter, W.J.</au><au>Ownby, J.F.</au><au>Traylor, A.G.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>High temperature fretting fatigue behavior of IN100</atitle><jtitle>International journal of fatigue</jtitle><date>2010-08-01</date><risdate>2010</risdate><volume>32</volume><issue>8</issue><spage>1289</spage><epage>1298</epage><pages>1289-1298</pages><issn>0142-1123</issn><eissn>1879-3452</eissn><coden>IJFADB</coden><abstract>Fretting fatigue behavior of a nickel-base superalloy, IN100, was investigated at 600
°C. Fretting fatigue tests were conducted at various stress levels using cylinder-on-flat contact configuration. Effects of microstructure were also investigated by varying the gamma grain size (3
μm versus 7
μm). Additionally, effects of contact load were studied. Furthermore, plain fatigue tests of IN100 with two microstructures were also conducted. Fretting reduced the strength/life in comparison to those of the plain fatigue almost equally in both microstructures. Increase of contact load reduced the fretting fatigue strength/life. An increase of the gamma grain size decreased the fretting fatigue strength/life of IN100. Fracture surfaces of the 3
μm grain microstructure showed intergranular and tortuous crack path while the 7
μm grain microstructure had transgranular and relatively smoother crack path. Fractographic analysis indicated that the 3
μm grain microstructure had a higher resistance to the fretting fatigue crack nucleation and initiation as well as to the crack growth in comparison to the 7
μm grain microstructure, which was in agreement with the observed plain and fretting fatigue behaviors. Furthermore, plain and fretting fatigue performances improved at 600
°C in comparison to room temperature with both microstructures.</abstract><cop>Kidlington</cop><pub>Elsevier Ltd</pub><doi>10.1016/j.ijfatigue.2010.01.012</doi><tpages>10</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0142-1123 |
| ispartof | International journal of fatigue, 2010-08, Vol.32 (8), p.1289-1298 |
| issn | 0142-1123 1879-3452 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_753751691 |
| source | Elsevier ScienceDirect Journals |
| subjects | Applied sciences Contact load Crack initiation Crack propagation Cylinders Elevated temperature Exact sciences and technology Fatigue Fatigue (materials) Fatigue tests Fracture mechanics Fretting Grains IN100 Mechanical properties and methods of testing. Rheology. Fracture mechanics. Tribology Metals. Metallurgy Microstructure Strength |
| title | High temperature fretting fatigue behavior of IN100 |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-15T06%3A10%3A43IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=High%20temperature%20fretting%20fatigue%20behavior%20of%20IN100&rft.jtitle=International%20journal%20of%20fatigue&rft.au=Mall,%20S.&rft.date=2010-08-01&rft.volume=32&rft.issue=8&rft.spage=1289&rft.epage=1298&rft.pages=1289-1298&rft.issn=0142-1123&rft.eissn=1879-3452&rft.coden=IJFADB&rft_id=info:doi/10.1016/j.ijfatigue.2010.01.012&rft_dat=%3Cproquest_cross%3E753751691%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=753751691&rft_id=info:pmid/&rft_els_id=S0142112310000253&rfr_iscdi=true |