Stem surface roughness alters creep induced subsidence and ‘taper-lock’ in a cemented femoral hip prosthesis

The clinical success of polished tapered stems has been widely reported in numerous long term studies. The mechanical environment that exists for polished tapered stems, however, is not fully understood. In this investigation, a collarless, tapered femoral total hip stem with an unsupported distal tip was evaluated using a ‘physiological’ three-dimensional (3D) finite element analysis. It was hypothesized that stem–cement interface friction, which alters the magnitude and orientation of the cement mantle stress, would subsequently influence stem ‘taper-lock’ and viscoelastic relaxation of bone cement stresses. The hypothesis that creep-induced subsidence would result in increases to stem–cement normal (radial) interface stresses was also examined. Utilizing a viscoelastic material model for the bone cement in the analysis, three different stem–cement interface conditions were considered: debonded stem with zero friction coefficient ( μ=0) (frictionless), debonded stem with stem–cement interface friction ( μ=0.22) (‘smooth’ or polished) and a completely bonded stem (‘rough’). Stem roughness had a profound influence on cement mantle stress, stem subsidence and cement mantle stress relaxation over the 24-h test period. The frictionless and smooth tapered stems generated compressive normal stress at the stem–cement interface creating a mechanical environment indicative of ‘taper-lock’. The normal stress increased with decreasing stem–cement interface friction but decreased proximally with time and stem subsidence. Stem subsidence also increased with decreasing stem–cement interface friction. We conclude that polished stems have a greater potential to develop ‘taper-lock’ fixation than do rough stems. However, subsidence is not an important determinant of the maintenance of ‘taper-lock’. Rather subsidence is a function of stem–cement interface friction and bone cement creep.