Instrumented Measurement of Anteroposterior and Inversion-Eversion Laxity of the Normal Ankle Joint Complex
Manual examination is the most common method for the evaluation of ankle anteroposterior (AP) and inversion-eversion (I-E) laxity. Objective assessment data of normal ankle laxity must be provided before comparison with an injured ankle can be made. The purpose of this study was to compare AP transl...
Gespeichert in:
Veröffentlicht in: | Foot & ankle international 1999-12, Vol.20 (12), p.808-814 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Manual examination is the most common method for the evaluation of ankle anteroposterior (AP) and inversion-eversion (I-E) laxity. Objective assessment data of normal ankle laxity must be provided before comparison with an injured ankle can be made. The purpose of this study was to compare AP translation and I-E rotation at three force loads between dominant and nondominant ankles and to assess the test-retest reliability of a portable arthrometer in obtaining these measurements. The arthrometer consists of a frame that is fixed to the foot, a pad that is attached to the tibia, and a load-measuring handle that is attached to the foot plate through which the load is applied. A six-degrees-of-freedom spatial kinematic linkage system is connected between the tibial pad and the foot frame to measure motion. Instrumented measurement testing of total AP displacement and I-E rotation of both ankles was performed in 41 subjects (21 men and 20 women; mean age, 23.8 ± 4.4 years). Subjects had no history of ankle injury. Subjects were tested in the supine position while lying on a table with the knee secured in extension and the foot positioned at 0° of flexion. Laxity was measured from total AP displacement (millimeters) during loading to 125 N of AP force and from total I-E rotation (degrees of range of motion) during loading to 4000 N-mm. Reliability was evaluated by calculating intraclass correlation coefficients (2,1) at 75 N, 100 N, and 125 N of AP force and at 2000, 3000, and 4000 N-mm torque loads. Mean differences for displacement and rotation between the dominant and nondominant ankles at each of the force and torque loads were analyzed by dependent t-tests. For both the dominant and nondominant ankles, respectively, the reliability coefficients at each of the force loads for AP displacement (range, 0.82–0.89) and I-E rotation (range, 0.86–0.97) were high. The t-test analyses showed no significant differences (P ≥ 0.05) for total AP displacement or I-E rotation between the dominant and nondominant ankles at any of the force loads. The results are clinically useful in providing information about the reliability of measures at different AP and I-E force loads using a portable ankle ligament arthrometer. |
---|---|
ISSN: | 1071-1007 1944-7876 |
DOI: | 10.1177/107110079902001210 |