Study and optimization of the parameters of ingots for obtaining heavy rolled sections

Study and optimization of the parameters of ingots for obtaining heavy rolled sections

This article presents results of a study of the structural and physical inhomogeneity of an ingot used to produce rolled sections. The temperature of the outside surface of the ingot is measured as the ingot solidifies in the ingot mold and the thermal efficiency of the hot top is calculated. The da...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Metallurgist (New York) 2008-07, Vol.52 (7-8), p.439-445
Hauptverfasser: Mozgovoi, A. V., Zhul’ev, S. I., Zyuban, N. A., Fedorov, D. N., Rutskii, D. V.
Format: Artikel
Sprache:eng
Schlagworte:
Characterization and Evaluation of Materials
Chemistry and Materials Science
Ingot molds
Ingots
Inhomogeneity
Materials Science
Mathematical analysis
Metallic Materials
Metallurgy
Optimization
Thermal efficiency
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This article presents results of a study of the structural and physical inhomogeneity of an ingot used to produce rolled sections. The temperature of the outside surface of the ingot is measured as the ingot solidifies in the ingot mold and the thermal efficiency of the hot top is calculated. The data that are obtained show that the ingot must be modernized in order for it to be used to obtain large sections.
ISSN:0026-0894
1573-8892
DOI:10.1007/s11015-008-9070-7