Effect of microarc oxidation coating on fatigue performance of Ti–Al–Zr alloy
Ceramic coatings of different thickness were fabricated on Ti6Al2Zr1Mo1V alloy by microarc oxidation (MAO), and the effect of the coating on fatigue life was evaluated by 810 Material Test System. The microstructure, phase and chemical composition of the coatings were determined by SEM, XRD and EDS...
Gespeichert in:
| Veröffentlicht in: | Applied surface science 2009-07, Vol.255 (20), p.8616-8623 |
|---|---|
| Hauptverfasser: | , , , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 8623 |
|---|---|
| container_issue | 20 |
| container_start_page | 8616 |
| container_title | Applied surface science |
| container_volume | 255 |
| creator | Wang, Y.M. Zhang, P.F. Guo, L.X. Ouyang, J.H. Zhou, Y. Jia, D.C. |
| description | Ceramic coatings of different thickness were fabricated on Ti6Al2Zr1Mo1V alloy by microarc oxidation (MAO), and the effect of the coating on fatigue life was evaluated by 810 Material Test System. The microstructure, phase and chemical composition of the coatings were determined by SEM, XRD and EDS techniques. The coating mainly consists of rutile and a small amount of anatase TiO
2. With oxidation time ranging from 10 to 30
min, the coating thickness increases from 13 to 25
μm, while the interface between coating and substrate becomes more zigzag, characterized by increasing overgrowth regions of coating into substrate. Under the same cyclic stress of 750
MPa, the fatigue life decreases from 2.08
×
10
6 cycles for uncoated specimen to about 3
×
10
4 cycles for microarc oxidized specimen. Under the cyclic stress, the thicker the coating, the more cracks initiate in the overgrowth regions of coating into substrate near the interface, which are considered as the notch sites of stress concentration to induce the crack initiation, also is the key factor to cause the facture. |
| doi_str_mv | 10.1016/j.apsusc.2009.06.038 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_35179078</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0169433209008265</els_id><sourcerecordid>35179078</sourcerecordid><originalsourceid>FETCH-LOGICAL-c367t-935a8ab578a3f21c92dfad3fa5b1de668b2e80bbf2eb11a0f042c01c2e1eae83</originalsourceid><addsrcrecordid>eNp9kM9Kw0AQxhdRsFbfwEMuekvcP02yuQil1D9QEKEnL8tkM1u2JN2624q9-Q6-oU_ihhSPXmYG5vtm-H6EXDOaMcqKu3UG27APOuOUVhktMirkCRkxWYo0z-XklIyirEonQvBzchHCmlLG43ZEXufGoN4lziSd1d6B14n7tA3srNsk2sW-WSVxNHFa7THZojfOd7DR2JuW9ufre9rG8uYTaFt3uCRnBtqAV8c-JsuH-XL2lC5eHp9n00WqRVHu0krkIKHOSwnCcKYr3hhohIG8Zg0Whaw5SlrXhmPNGFBDJ1xTpjkyBJRiTG6Hs1vv3vcYdqqzQWPbwgbdPiiRs7KiZS-cDMKYLgSPRm297cAfFKOqx6fWasCnenyKFirii7ab430IGlrjY2Ib_rycSZaXFYu6-0GHMeuHRa-CthjpNNZHsKpx9v9HvzlXivc</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>35179078</pqid></control><display><type>article</type><title>Effect of microarc oxidation coating on fatigue performance of Ti–Al–Zr alloy</title><source>Elsevier ScienceDirect Journals Complete</source><creator>Wang, Y.M. ; Zhang, P.F. ; Guo, L.X. ; Ouyang, J.H. ; Zhou, Y. ; Jia, D.C.</creator><creatorcontrib>Wang, Y.M. ; Zhang, P.F. ; Guo, L.X. ; Ouyang, J.H. ; Zhou, Y. ; Jia, D.C.</creatorcontrib><description>Ceramic coatings of different thickness were fabricated on Ti6Al2Zr1Mo1V alloy by microarc oxidation (MAO), and the effect of the coating on fatigue life was evaluated by 810 Material Test System. The microstructure, phase and chemical composition of the coatings were determined by SEM, XRD and EDS techniques. The coating mainly consists of rutile and a small amount of anatase TiO
2. With oxidation time ranging from 10 to 30
min, the coating thickness increases from 13 to 25
μm, while the interface between coating and substrate becomes more zigzag, characterized by increasing overgrowth regions of coating into substrate. Under the same cyclic stress of 750
MPa, the fatigue life decreases from 2.08
×
10
6 cycles for uncoated specimen to about 3
×
10
4 cycles for microarc oxidized specimen. Under the cyclic stress, the thicker the coating, the more cracks initiate in the overgrowth regions of coating into substrate near the interface, which are considered as the notch sites of stress concentration to induce the crack initiation, also is the key factor to cause the facture.</description><identifier>ISSN: 0169-4332</identifier><identifier>EISSN: 1873-5584</identifier><identifier>DOI: 10.1016/j.apsusc.2009.06.038</identifier><language>eng</language><publisher>Amsterdam: Elsevier B.V</publisher><subject>Coatings ; Condensed matter: electronic structure, electrical, magnetic, and optical properties ; Condensed matter: structure, mechanical and thermal properties ; Cross-disciplinary physics: materials science; rheology ; Exact sciences and technology ; Fatigue properties ; Microarc oxidation (MAO) ; Physics ; Ti–Al–Zr alloy</subject><ispartof>Applied surface science, 2009-07, Vol.255 (20), p.8616-8623</ispartof><rights>2009 Elsevier B.V.</rights><rights>2015 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c367t-935a8ab578a3f21c92dfad3fa5b1de668b2e80bbf2eb11a0f042c01c2e1eae83</citedby><cites>FETCH-LOGICAL-c367t-935a8ab578a3f21c92dfad3fa5b1de668b2e80bbf2eb11a0f042c01c2e1eae83</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/j.apsusc.2009.06.038$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>315,781,785,3551,27929,27930,46000</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=21815791$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Wang, Y.M.</creatorcontrib><creatorcontrib>Zhang, P.F.</creatorcontrib><creatorcontrib>Guo, L.X.</creatorcontrib><creatorcontrib>Ouyang, J.H.</creatorcontrib><creatorcontrib>Zhou, Y.</creatorcontrib><creatorcontrib>Jia, D.C.</creatorcontrib><title>Effect of microarc oxidation coating on fatigue performance of Ti–Al–Zr alloy</title><title>Applied surface science</title><description>Ceramic coatings of different thickness were fabricated on Ti6Al2Zr1Mo1V alloy by microarc oxidation (MAO), and the effect of the coating on fatigue life was evaluated by 810 Material Test System. The microstructure, phase and chemical composition of the coatings were determined by SEM, XRD and EDS techniques. The coating mainly consists of rutile and a small amount of anatase TiO
2. With oxidation time ranging from 10 to 30
min, the coating thickness increases from 13 to 25
μm, while the interface between coating and substrate becomes more zigzag, characterized by increasing overgrowth regions of coating into substrate. Under the same cyclic stress of 750
MPa, the fatigue life decreases from 2.08
×
10
6 cycles for uncoated specimen to about 3
×
10
4 cycles for microarc oxidized specimen. Under the cyclic stress, the thicker the coating, the more cracks initiate in the overgrowth regions of coating into substrate near the interface, which are considered as the notch sites of stress concentration to induce the crack initiation, also is the key factor to cause the facture.</description><subject>Coatings</subject><subject>Condensed matter: electronic structure, electrical, magnetic, and optical properties</subject><subject>Condensed matter: structure, mechanical and thermal properties</subject><subject>Cross-disciplinary physics: materials science; rheology</subject><subject>Exact sciences and technology</subject><subject>Fatigue properties</subject><subject>Microarc oxidation (MAO)</subject><subject>Physics</subject><subject>Ti–Al–Zr alloy</subject><issn>0169-4332</issn><issn>1873-5584</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2009</creationdate><recordtype>article</recordtype><recordid>eNp9kM9Kw0AQxhdRsFbfwEMuekvcP02yuQil1D9QEKEnL8tkM1u2JN2624q9-Q6-oU_ihhSPXmYG5vtm-H6EXDOaMcqKu3UG27APOuOUVhktMirkCRkxWYo0z-XklIyirEonQvBzchHCmlLG43ZEXufGoN4lziSd1d6B14n7tA3srNsk2sW-WSVxNHFa7THZojfOd7DR2JuW9ufre9rG8uYTaFt3uCRnBtqAV8c-JsuH-XL2lC5eHp9n00WqRVHu0krkIKHOSwnCcKYr3hhohIG8Zg0Whaw5SlrXhmPNGFBDJ1xTpjkyBJRiTG6Hs1vv3vcYdqqzQWPbwgbdPiiRs7KiZS-cDMKYLgSPRm297cAfFKOqx6fWasCnenyKFirii7ab430IGlrjY2Ib_rycSZaXFYu6-0GHMeuHRa-CthjpNNZHsKpx9v9HvzlXivc</recordid><startdate>20090730</startdate><enddate>20090730</enddate><creator>Wang, Y.M.</creator><creator>Zhang, P.F.</creator><creator>Guo, L.X.</creator><creator>Ouyang, J.H.</creator><creator>Zhou, Y.</creator><creator>Jia, D.C.</creator><general>Elsevier B.V</general><general>Elsevier</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>7U5</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope><scope>L7M</scope></search><sort><creationdate>20090730</creationdate><title>Effect of microarc oxidation coating on fatigue performance of Ti–Al–Zr alloy</title><author>Wang, Y.M. ; Zhang, P.F. ; Guo, L.X. ; Ouyang, J.H. ; Zhou, Y. ; Jia, D.C.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c367t-935a8ab578a3f21c92dfad3fa5b1de668b2e80bbf2eb11a0f042c01c2e1eae83</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2009</creationdate><topic>Coatings</topic><topic>Condensed matter: electronic structure, electrical, magnetic, and optical properties</topic><topic>Condensed matter: structure, mechanical and thermal properties</topic><topic>Cross-disciplinary physics: materials science; rheology</topic><topic>Exact sciences and technology</topic><topic>Fatigue properties</topic><topic>Microarc oxidation (MAO)</topic><topic>Physics</topic><topic>Ti–Al–Zr alloy</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Wang, Y.M.</creatorcontrib><creatorcontrib>Zhang, P.F.</creatorcontrib><creatorcontrib>Guo, L.X.</creatorcontrib><creatorcontrib>Ouyang, J.H.</creatorcontrib><creatorcontrib>Zhou, Y.</creatorcontrib><creatorcontrib>Jia, D.C.</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>Solid State and Superconductivity Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>Applied surface science</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Wang, Y.M.</au><au>Zhang, P.F.</au><au>Guo, L.X.</au><au>Ouyang, J.H.</au><au>Zhou, Y.</au><au>Jia, D.C.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Effect of microarc oxidation coating on fatigue performance of Ti–Al–Zr alloy</atitle><jtitle>Applied surface science</jtitle><date>2009-07-30</date><risdate>2009</risdate><volume>255</volume><issue>20</issue><spage>8616</spage><epage>8623</epage><pages>8616-8623</pages><issn>0169-4332</issn><eissn>1873-5584</eissn><abstract>Ceramic coatings of different thickness were fabricated on Ti6Al2Zr1Mo1V alloy by microarc oxidation (MAO), and the effect of the coating on fatigue life was evaluated by 810 Material Test System. The microstructure, phase and chemical composition of the coatings were determined by SEM, XRD and EDS techniques. The coating mainly consists of rutile and a small amount of anatase TiO
2. With oxidation time ranging from 10 to 30
min, the coating thickness increases from 13 to 25
μm, while the interface between coating and substrate becomes more zigzag, characterized by increasing overgrowth regions of coating into substrate. Under the same cyclic stress of 750
MPa, the fatigue life decreases from 2.08
×
10
6 cycles for uncoated specimen to about 3
×
10
4 cycles for microarc oxidized specimen. Under the cyclic stress, the thicker the coating, the more cracks initiate in the overgrowth regions of coating into substrate near the interface, which are considered as the notch sites of stress concentration to induce the crack initiation, also is the key factor to cause the facture.</abstract><cop>Amsterdam</cop><pub>Elsevier B.V</pub><doi>10.1016/j.apsusc.2009.06.038</doi><tpages>8</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0169-4332 |
| ispartof | Applied surface science, 2009-07, Vol.255 (20), p.8616-8623 |
| issn | 0169-4332 1873-5584 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_35179078 |
| source | Elsevier ScienceDirect Journals Complete |
| subjects | Coatings Condensed matter: electronic structure, electrical, magnetic, and optical properties Condensed matter: structure, mechanical and thermal properties Cross-disciplinary physics: materials science rheology Exact sciences and technology Fatigue properties Microarc oxidation (MAO) Physics Ti–Al–Zr alloy |
| title | Effect of microarc oxidation coating on fatigue performance of Ti–Al–Zr alloy |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-13T00%3A15%3A28IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Effect%20of%20microarc%20oxidation%20coating%20on%20fatigue%20performance%20of%20Ti%E2%80%93Al%E2%80%93Zr%20alloy&rft.jtitle=Applied%20surface%20science&rft.au=Wang,%20Y.M.&rft.date=2009-07-30&rft.volume=255&rft.issue=20&rft.spage=8616&rft.epage=8623&rft.pages=8616-8623&rft.issn=0169-4332&rft.eissn=1873-5584&rft_id=info:doi/10.1016/j.apsusc.2009.06.038&rft_dat=%3Cproquest_cross%3E35179078%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=35179078&rft_id=info:pmid/&rft_els_id=S0169433209008265&rfr_iscdi=true |