Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters

Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters

Taguchi design methodology is applied to experiments of flank mill machining parameters of titanium alloy TC11 (Ti6.5A13.5Mo2Zr0.35Si) in conventional and high speed regimes. This study includes three factors, cutting speed, feed rate and depth of cut, about two types of tools. Experimental runs are...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Key engineering materials 2009-01, Vol.407-408, p.608-611
Hauptverfasser: Yi, Jun Jie, Liu, Chang Yi, Chu, Cheng Long, Zhou, Wen Hui
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 611
container_issue
container_start_page 608
container_title Key engineering materials
container_volume 407-408
creator Yi, Jun Jie
Liu, Chang Yi
Chu, Cheng Long
Zhou, Wen Hui
description Taguchi design methodology is applied to experiments of flank mill machining parameters of titanium alloy TC11 (Ti6.5A13.5Mo2Zr0.35Si) in conventional and high speed regimes. This study includes three factors, cutting speed, feed rate and depth of cut, about two types of tools. Experimental runs are conducted using an orthogonal array of L9(33), with measurement of cutting force, cutting temperature and surface roughness. The analysis of result shows that the factors combination for good surface roughness, low cutting temperature and low resultant cutting force are high cutting speed, low feed rate and low depth of cut.
doi_str_mv 10.4028/www.scientific.net/KEM.407-408.608
format Article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_34831950</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>34831950</sourcerecordid><originalsourceid>FETCH-LOGICAL-c371t-1bf47628d86924705ba99803c93a6d08d685f1c28d00600d733bb799c7dee9ce3</originalsourceid><addsrcrecordid>eNqVkMtOwzAQRS0EEqXwD16xQEpqx4kfS1paXq1gEdaW4zitS5oU21Hh7zEqEmsWoxlpro5mDgA3GKU5yvjkcDikXlvTBdtYnXYmTJ7nq7hjSY54ShE_ASNMaZYIJorTOCNMEsEzeg4uvN8iRDDHxQg8lWo96I2FKxM2fQ2nypsazj_3xtldxHvYN7C0QXV22MFyhjFctKp7hyvbtrZbw1fl1M4E4_wlOGtU683Vbx-Dt8W8nD0ky5f7x9ntMtGE4ZDgqskZzXjNqchyhopKCcER0YIoWiNeU140WMcAQhShmhFSVUwIzWpjhDZkDK6P3L3rPwbjg9xZr00bzzL94CXJOcGiQDE4PQa16713ppH7-JRyXxIj-aNRRo3yT6OMGmXUGHcsFpdRY4TcHSHBqc4Hozdy2w-uix_-B_MN1AGE4w</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>34831950</pqid></control><display><type>article</type><title>Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters</title><source>Scientific.net Journals</source><creator>Yi, Jun Jie ; Liu, Chang Yi ; Chu, Cheng Long ; Zhou, Wen Hui</creator><creatorcontrib>Yi, Jun Jie ; Liu, Chang Yi ; Chu, Cheng Long ; Zhou, Wen Hui</creatorcontrib><description>Taguchi design methodology is applied to experiments of flank mill machining parameters of titanium alloy TC11 (Ti6.5A13.5Mo2Zr0.35Si) in conventional and high speed regimes. This study includes three factors, cutting speed, feed rate and depth of cut, about two types of tools. Experimental runs are conducted using an orthogonal array of L9(33), with measurement of cutting force, cutting temperature and surface roughness. The analysis of result shows that the factors combination for good surface roughness, low cutting temperature and low resultant cutting force are high cutting speed, low feed rate and low depth of cut.</description><identifier>ISSN: 1013-9826</identifier><identifier>ISSN: 1662-9795</identifier><identifier>EISSN: 1662-9795</identifier><identifier>DOI: 10.4028/www.scientific.net/KEM.407-408.608</identifier><language>eng</language><publisher>Trans Tech Publications Ltd</publisher><ispartof>Key engineering materials, 2009-01, Vol.407-408, p.608-611</ispartof><rights>2009 Trans Tech Publications Ltd</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c371t-1bf47628d86924705ba99803c93a6d08d685f1c28d00600d733bb799c7dee9ce3</citedby><cites>FETCH-LOGICAL-c371t-1bf47628d86924705ba99803c93a6d08d685f1c28d00600d733bb799c7dee9ce3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Uhttps://www.scientific.net/Image/TitleCover/806?width=600</thumbnail><link.rule.ids>314,780,784,27922,27923</link.rule.ids></links><search><creatorcontrib>Yi, Jun Jie</creatorcontrib><creatorcontrib>Liu, Chang Yi</creatorcontrib><creatorcontrib>Chu, Cheng Long</creatorcontrib><creatorcontrib>Zhou, Wen Hui</creatorcontrib><title>Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters</title><title>Key engineering materials</title><description>Taguchi design methodology is applied to experiments of flank mill machining parameters of titanium alloy TC11 (Ti6.5A13.5Mo2Zr0.35Si) in conventional and high speed regimes. This study includes three factors, cutting speed, feed rate and depth of cut, about two types of tools. Experimental runs are conducted using an orthogonal array of L9(33), with measurement of cutting force, cutting temperature and surface roughness. The analysis of result shows that the factors combination for good surface roughness, low cutting temperature and low resultant cutting force are high cutting speed, low feed rate and low depth of cut.</description><issn>1013-9826</issn><issn>1662-9795</issn><issn>1662-9795</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2009</creationdate><recordtype>article</recordtype><recordid>eNqVkMtOwzAQRS0EEqXwD16xQEpqx4kfS1paXq1gEdaW4zitS5oU21Hh7zEqEmsWoxlpro5mDgA3GKU5yvjkcDikXlvTBdtYnXYmTJ7nq7hjSY54ShE_ASNMaZYIJorTOCNMEsEzeg4uvN8iRDDHxQg8lWo96I2FKxM2fQ2nypsazj_3xtldxHvYN7C0QXV22MFyhjFctKp7hyvbtrZbw1fl1M4E4_wlOGtU683Vbx-Dt8W8nD0ky5f7x9ntMtGE4ZDgqskZzXjNqchyhopKCcER0YIoWiNeU140WMcAQhShmhFSVUwIzWpjhDZkDK6P3L3rPwbjg9xZr00bzzL94CXJOcGiQDE4PQa16713ppH7-JRyXxIj-aNRRo3yT6OMGmXUGHcsFpdRY4TcHSHBqc4Hozdy2w-uix_-B_MN1AGE4w</recordid><startdate>20090101</startdate><enddate>20090101</enddate><creator>Yi, Jun Jie</creator><creator>Liu, Chang Yi</creator><creator>Chu, Cheng Long</creator><creator>Zhou, Wen Hui</creator><general>Trans Tech Publications Ltd</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>20090101</creationdate><title>Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters</title><author>Yi, Jun Jie ; Liu, Chang Yi ; Chu, Cheng Long ; Zhou, Wen Hui</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c371t-1bf47628d86924705ba99803c93a6d08d685f1c28d00600d733bb799c7dee9ce3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2009</creationdate><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Yi, Jun Jie</creatorcontrib><creatorcontrib>Liu, Chang Yi</creatorcontrib><creatorcontrib>Chu, Cheng Long</creatorcontrib><creatorcontrib>Zhou, Wen Hui</creatorcontrib><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Key engineering materials</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Yi, Jun Jie</au><au>Liu, Chang Yi</au><au>Chu, Cheng Long</au><au>Zhou, Wen Hui</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters</atitle><jtitle>Key engineering materials</jtitle><date>2009-01-01</date><risdate>2009</risdate><volume>407-408</volume><spage>608</spage><epage>611</epage><pages>608-611</pages><issn>1013-9826</issn><issn>1662-9795</issn><eissn>1662-9795</eissn><abstract>Taguchi design methodology is applied to experiments of flank mill machining parameters of titanium alloy TC11 (Ti6.5A13.5Mo2Zr0.35Si) in conventional and high speed regimes. This study includes three factors, cutting speed, feed rate and depth of cut, about two types of tools. Experimental runs are conducted using an orthogonal array of L9(33), with measurement of cutting force, cutting temperature and surface roughness. The analysis of result shows that the factors combination for good surface roughness, low cutting temperature and low resultant cutting force are high cutting speed, low feed rate and low depth of cut.</abstract><pub>Trans Tech Publications Ltd</pub><doi>10.4028/www.scientific.net/KEM.407-408.608</doi><tpages>4</tpages></addata></record>
fulltext fulltext
identifier ISSN: 1013-9826
ispartof Key engineering materials, 2009-01, Vol.407-408, p.608-611
issn 1013-9826
1662-9795
1662-9795
language eng
recordid cdi_proquest_miscellaneous_34831950
source Scientific.net Journals
title Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-14T12%3A35%3A21IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Taguchi%20Method%20Based%20Experiments%20of%20Titanium%20TC11%20Flank%20Milling%20Parameters&rft.jtitle=Key%20engineering%20materials&rft.au=Yi,%20Jun%20Jie&rft.date=2009-01-01&rft.volume=407-408&rft.spage=608&rft.epage=611&rft.pages=608-611&rft.issn=1013-9826&rft.eissn=1662-9795&rft_id=info:doi/10.4028/www.scientific.net/KEM.407-408.608&rft_dat=%3Cproquest_cross%3E34831950%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=34831950&rft_id=info:pmid/&rfr_iscdi=true