Coefficients of friction of TiN coatings with preferred grain orientations under dry condition
In order to decrease the friction loss of mechanical parts, frictional properties of TiN coatings with preferred grain orientations deposited by arc ion plating (AIP) were investigated. The preferred grain orientation of TiN coatings is controlled by changing the substrate bias voltage. In a ball-on...
Gespeichert in:
| Veröffentlicht in: | Wear 2008-09, Vol.265 (7), p.1017-1022 |
|---|---|
| Hauptverfasser: | , , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 1022 |
|---|---|
| container_issue | 7 |
| container_start_page | 1017 |
| container_title | Wear |
| container_volume | 265 |
| creator | Azushima, Akira Tanno, Yasuo Iwata, Hiroyuki Aoki, Kohshiro |
| description | In order to decrease the friction loss of mechanical parts, frictional properties of TiN coatings with preferred grain orientations deposited by arc ion plating (AIP) were investigated. The preferred grain orientation of TiN coatings is controlled by changing the substrate bias voltage. In a ball-on-disc tribometer, a TiN coating with a (1
1
1) preferred grain orientation deposited at a substrate bias voltage of −200
V revealed a lower coefficient of friction than one with a (2
0
0) preferred grain orientation. In order to understand the frictional properties of the TiN-deposited specimens, the microstructures and chemical compositions of TiN coatings were investigated. The good frictional properties of the TiN coating with a (1
1
1) preferred grain orientation deposited at −200
V is due to the creation of a thin Ti oxide layer on the surface of SUJ2 ball that has good lubricity and prevents adhesion of Fe from SUJ2 ball to TiN coatings. |
| doi_str_mv | 10.1016/j.wear.2008.02.019 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_33552316</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0043164808000823</els_id><sourcerecordid>33552316</sourcerecordid><originalsourceid>FETCH-LOGICAL-c361t-e31846cc5afa5aa222c3deef5f1dfc01d8a3d1ad40ec345f951a83dd292991053</originalsourceid><addsrcrecordid>eNp9kMtKAzEUQIMoWKs_4Go2upsxz3mAGym-oOimbg2X5KamTGdqMrX0783Q4tJVQjjnhnsIuWa0YJSVd6tihxAKTmldUF5Q1pyQCasrkXNVVadkQqkUOStlfU4uYlxRmhBVTsjnrEfnvPHYDTHrXeaCN4Pvu_G-8G-Z6WHw3TJmOz98ZZuADkNAmy0D-ASFUYRRiNm2sxgyG_ZJ6qwfHy_JmYM24tXxnJKPp8fF7CWfvz-_zh7muRElG3IUrJalMQocKADOuREW0SnHrDOU2RqEZWAlRSOkco1iUAtrecObhlElpuT2MHcT-u8txkGvfTTYttBhv41aCKW4YGUC-QE0oY8xbaM3wa8h7DWjekypV3pMqceUmnKdOiXp5jgdooHWBeiMj38mp1LWspKJuz9wmFb98Rh0HMMatD6gGbTt_X_f_AJWnIvj</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>33552316</pqid></control><display><type>article</type><title>Coefficients of friction of TiN coatings with preferred grain orientations under dry condition</title><source>Elsevier ScienceDirect Journals</source><creator>Azushima, Akira ; Tanno, Yasuo ; Iwata, Hiroyuki ; Aoki, Kohshiro</creator><creatorcontrib>Azushima, Akira ; Tanno, Yasuo ; Iwata, Hiroyuki ; Aoki, Kohshiro</creatorcontrib><description>In order to decrease the friction loss of mechanical parts, frictional properties of TiN coatings with preferred grain orientations deposited by arc ion plating (AIP) were investigated. The preferred grain orientation of TiN coatings is controlled by changing the substrate bias voltage. In a ball-on-disc tribometer, a TiN coating with a (1
1
1) preferred grain orientation deposited at a substrate bias voltage of −200
V revealed a lower coefficient of friction than one with a (2
0
0) preferred grain orientation. In order to understand the frictional properties of the TiN-deposited specimens, the microstructures and chemical compositions of TiN coatings were investigated. The good frictional properties of the TiN coating with a (1
1
1) preferred grain orientation deposited at −200
V is due to the creation of a thin Ti oxide layer on the surface of SUJ2 ball that has good lubricity and prevents adhesion of Fe from SUJ2 ball to TiN coatings.</description><identifier>ISSN: 0043-1648</identifier><identifier>EISSN: 1873-2577</identifier><identifier>DOI: 10.1016/j.wear.2008.02.019</identifier><identifier>CODEN: WEARAH</identifier><language>eng</language><publisher>Lausanne: Elsevier B.V</publisher><subject>Applied sciences ; Arc ion plating ; Coefficient of friction ; Exact sciences and technology ; Friction, wear, lubrication ; Machine components ; Mechanical engineering. Machine design ; Preferred orientation ; TiN</subject><ispartof>Wear, 2008-09, Vol.265 (7), p.1017-1022</ispartof><rights>2008 Elsevier B.V.</rights><rights>2008 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c361t-e31846cc5afa5aa222c3deef5f1dfc01d8a3d1ad40ec345f951a83dd292991053</citedby><cites>FETCH-LOGICAL-c361t-e31846cc5afa5aa222c3deef5f1dfc01d8a3d1ad40ec345f951a83dd292991053</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://www.sciencedirect.com/science/article/pii/S0043164808000823$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,776,780,3536,27903,27904,65309</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=20448474$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Azushima, Akira</creatorcontrib><creatorcontrib>Tanno, Yasuo</creatorcontrib><creatorcontrib>Iwata, Hiroyuki</creatorcontrib><creatorcontrib>Aoki, Kohshiro</creatorcontrib><title>Coefficients of friction of TiN coatings with preferred grain orientations under dry condition</title><title>Wear</title><description>In order to decrease the friction loss of mechanical parts, frictional properties of TiN coatings with preferred grain orientations deposited by arc ion plating (AIP) were investigated. The preferred grain orientation of TiN coatings is controlled by changing the substrate bias voltage. In a ball-on-disc tribometer, a TiN coating with a (1
1
1) preferred grain orientation deposited at a substrate bias voltage of −200
V revealed a lower coefficient of friction than one with a (2
0
0) preferred grain orientation. In order to understand the frictional properties of the TiN-deposited specimens, the microstructures and chemical compositions of TiN coatings were investigated. The good frictional properties of the TiN coating with a (1
1
1) preferred grain orientation deposited at −200
V is due to the creation of a thin Ti oxide layer on the surface of SUJ2 ball that has good lubricity and prevents adhesion of Fe from SUJ2 ball to TiN coatings.</description><subject>Applied sciences</subject><subject>Arc ion plating</subject><subject>Coefficient of friction</subject><subject>Exact sciences and technology</subject><subject>Friction, wear, lubrication</subject><subject>Machine components</subject><subject>Mechanical engineering. Machine design</subject><subject>Preferred orientation</subject><subject>TiN</subject><issn>0043-1648</issn><issn>1873-2577</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2008</creationdate><recordtype>article</recordtype><recordid>eNp9kMtKAzEUQIMoWKs_4Go2upsxz3mAGym-oOimbg2X5KamTGdqMrX0783Q4tJVQjjnhnsIuWa0YJSVd6tihxAKTmldUF5Q1pyQCasrkXNVVadkQqkUOStlfU4uYlxRmhBVTsjnrEfnvPHYDTHrXeaCN4Pvu_G-8G-Z6WHw3TJmOz98ZZuADkNAmy0D-ASFUYRRiNm2sxgyG_ZJ6qwfHy_JmYM24tXxnJKPp8fF7CWfvz-_zh7muRElG3IUrJalMQocKADOuREW0SnHrDOU2RqEZWAlRSOkco1iUAtrecObhlElpuT2MHcT-u8txkGvfTTYttBhv41aCKW4YGUC-QE0oY8xbaM3wa8h7DWjekypV3pMqceUmnKdOiXp5jgdooHWBeiMj38mp1LWspKJuz9wmFb98Rh0HMMatD6gGbTt_X_f_AJWnIvj</recordid><startdate>20080920</startdate><enddate>20080920</enddate><creator>Azushima, Akira</creator><creator>Tanno, Yasuo</creator><creator>Iwata, Hiroyuki</creator><creator>Aoki, Kohshiro</creator><general>Elsevier B.V</general><general>Elsevier Science</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>7TB</scope><scope>7U5</scope><scope>8BQ</scope><scope>8FD</scope><scope>FR3</scope><scope>JG9</scope><scope>L7M</scope></search><sort><creationdate>20080920</creationdate><title>Coefficients of friction of TiN coatings with preferred grain orientations under dry condition</title><author>Azushima, Akira ; Tanno, Yasuo ; Iwata, Hiroyuki ; Aoki, Kohshiro</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c361t-e31846cc5afa5aa222c3deef5f1dfc01d8a3d1ad40ec345f951a83dd292991053</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2008</creationdate><topic>Applied sciences</topic><topic>Arc ion plating</topic><topic>Coefficient of friction</topic><topic>Exact sciences and technology</topic><topic>Friction, wear, lubrication</topic><topic>Machine components</topic><topic>Mechanical engineering. Machine design</topic><topic>Preferred orientation</topic><topic>TiN</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Azushima, Akira</creatorcontrib><creatorcontrib>Tanno, Yasuo</creatorcontrib><creatorcontrib>Iwata, Hiroyuki</creatorcontrib><creatorcontrib>Aoki, Kohshiro</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>Mechanical & Transportation Engineering Abstracts</collection><collection>Solid State and Superconductivity Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Engineering Research Database</collection><collection>Materials Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>Wear</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Azushima, Akira</au><au>Tanno, Yasuo</au><au>Iwata, Hiroyuki</au><au>Aoki, Kohshiro</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Coefficients of friction of TiN coatings with preferred grain orientations under dry condition</atitle><jtitle>Wear</jtitle><date>2008-09-20</date><risdate>2008</risdate><volume>265</volume><issue>7</issue><spage>1017</spage><epage>1022</epage><pages>1017-1022</pages><issn>0043-1648</issn><eissn>1873-2577</eissn><coden>WEARAH</coden><abstract>In order to decrease the friction loss of mechanical parts, frictional properties of TiN coatings with preferred grain orientations deposited by arc ion plating (AIP) were investigated. The preferred grain orientation of TiN coatings is controlled by changing the substrate bias voltage. In a ball-on-disc tribometer, a TiN coating with a (1
1
1) preferred grain orientation deposited at a substrate bias voltage of −200
V revealed a lower coefficient of friction than one with a (2
0
0) preferred grain orientation. In order to understand the frictional properties of the TiN-deposited specimens, the microstructures and chemical compositions of TiN coatings were investigated. The good frictional properties of the TiN coating with a (1
1
1) preferred grain orientation deposited at −200
V is due to the creation of a thin Ti oxide layer on the surface of SUJ2 ball that has good lubricity and prevents adhesion of Fe from SUJ2 ball to TiN coatings.</abstract><cop>Lausanne</cop><cop>Amsterdam</cop><cop>New York, NY</cop><pub>Elsevier B.V</pub><doi>10.1016/j.wear.2008.02.019</doi><tpages>6</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0043-1648 |
| ispartof | Wear, 2008-09, Vol.265 (7), p.1017-1022 |
| issn | 0043-1648 1873-2577 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_33552316 |
| source | Elsevier ScienceDirect Journals |
| subjects | Applied sciences Arc ion plating Coefficient of friction Exact sciences and technology Friction, wear, lubrication Machine components Mechanical engineering. Machine design Preferred orientation TiN |
| title | Coefficients of friction of TiN coatings with preferred grain orientations under dry condition |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-27T02%3A11%3A58IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Coefficients%20of%20friction%20of%20TiN%20coatings%20with%20preferred%20grain%20orientations%20under%20dry%20condition&rft.jtitle=Wear&rft.au=Azushima,%20Akira&rft.date=2008-09-20&rft.volume=265&rft.issue=7&rft.spage=1017&rft.epage=1022&rft.pages=1017-1022&rft.issn=0043-1648&rft.eissn=1873-2577&rft.coden=WEARAH&rft_id=info:doi/10.1016/j.wear.2008.02.019&rft_dat=%3Cproquest_cross%3E33552316%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=33552316&rft_id=info:pmid/&rft_els_id=S0043164808000823&rfr_iscdi=true |