Development of Preparation Processes for CNT/Si3N4 Composites
Silicon nitride based composites with different amount (1, 3 and 5 wt%) of carbon nanotubes have been prepared. Optimisation of the manufacturing processes has been conducted to preserve the carbon nanotubes in composites and to avoid damaging during high temperature processing. The first results sh...
Gespeichert in:
| Veröffentlicht in: | Key engineering materials 2005-01, Vol.290, p.135-141 |
|---|---|
| Hauptverfasser: | , , , , , , |
| Format: | Artikel |
| Sprache: | eng |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 141 |
|---|---|
| container_issue | |
| container_start_page | 135 |
| container_title | Key engineering materials |
| container_volume | 290 |
| creator | Kövér, Zsuzsanna Balázsi, Csaba Kiricsi, Imre Wéber, Ferenc Arató, Péter Biró, L.P. Kónya, Zoltán |
| description | Silicon nitride based composites with different amount (1, 3 and 5 wt%) of carbon
nanotubes have been prepared. Optimisation of the manufacturing processes has been conducted to preserve the carbon nanotubes in composites and to avoid damaging during high temperature processing. The first results show that carbon nanotubes have a good contact to the surface of silicon nitride grains. With increasing the carbon nanotube content a lower densification rate was obtained together with the deterioration of the mechanical characteristics of composites. In the case of 1wt% and 3 wt% carbon nanotube addition the increase of pressure resulted in increase of bending strength. It was found that microstructure features achieved by properly designed sintering parameters are the main responsible factors for the strength improvements. |
| doi_str_mv | 10.4028/www.scientific.net/KEM.290.135 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_29953117</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>28918351</sourcerecordid><originalsourceid>FETCH-LOGICAL-c320t-7d14be21a3ea1b941c54e1435778e55ac3cd48dd94a0acc39170e49c9eb932623</originalsourceid><addsrcrecordid>eNqNkEtLw0AURoMoWKv_Iavuks6dR5JZKEqtD6xVsK6H6eQGU5JMnEkt_ntHKrjU1f0Wh3PhRNEESMoJLaa73S71psZuqKvapB0O04f5Y0olSYGJg2gEWUYTmUtxGDYBlsiCZsfRifcbQhgUIEbR-TV-YGP7NmhiW8XPDnvt9FDbLmxr0Hv0cWVdPFuupi81W_J4Ztve-npAfxodVbrxePZzx9HrzXw1u0sWT7f3s6tFYhglQ5KXwNdIQTPUsJYcjOAInIk8L1AIbZgpeVGWkmuijWEScoJcGolryWhG2Tia7L29s-9b9INqa2-waXSHdusVlVIwgPxvsJBQMAEBvNiDxlnvHVaqd3Wr3acCor7zqpBX_eZVIa8KecMrokLeILjcCwanOz-geVMbu3VdyPBfxRf02Ytm</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>28918351</pqid></control><display><type>article</type><title>Development of Preparation Processes for CNT/Si3N4 Composites</title><source>Scientific.net Journals</source><creator>Kövér, Zsuzsanna ; Balázsi, Csaba ; Kiricsi, Imre ; Wéber, Ferenc ; Arató, Péter ; Biró, L.P. ; Kónya, Zoltán</creator><creatorcontrib>Kövér, Zsuzsanna ; Balázsi, Csaba ; Kiricsi, Imre ; Wéber, Ferenc ; Arató, Péter ; Biró, L.P. ; Kónya, Zoltán</creatorcontrib><description>Silicon nitride based composites with different amount (1, 3 and 5 wt%) of carbon
nanotubes have been prepared. Optimisation of the manufacturing processes has been conducted to preserve the carbon nanotubes in composites and to avoid damaging during high temperature processing. The first results show that carbon nanotubes have a good contact to the surface of silicon nitride grains. With increasing the carbon nanotube content a lower densification rate was obtained together with the deterioration of the mechanical characteristics of composites. In the case of 1wt% and 3 wt% carbon nanotube addition the increase of pressure resulted in increase of bending strength. It was found that microstructure features achieved by properly designed sintering parameters are the main responsible factors for the strength improvements.</description><identifier>ISSN: 1013-9826</identifier><identifier>ISSN: 1662-9795</identifier><identifier>EISSN: 1662-9795</identifier><identifier>DOI: 10.4028/www.scientific.net/KEM.290.135</identifier><language>eng</language><publisher>Trans Tech Publications Ltd</publisher><ispartof>Key engineering materials, 2005-01, Vol.290, p.135-141</ispartof><rights>2005 Trans Tech Publications Ltd</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c320t-7d14be21a3ea1b941c54e1435778e55ac3cd48dd94a0acc39170e49c9eb932623</citedby><cites>FETCH-LOGICAL-c320t-7d14be21a3ea1b941c54e1435778e55ac3cd48dd94a0acc39170e49c9eb932623</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Uhttps://www.scientific.net/Image/TitleCover/523?width=600</thumbnail><link.rule.ids>314,776,780,27901,27902</link.rule.ids></links><search><creatorcontrib>Kövér, Zsuzsanna</creatorcontrib><creatorcontrib>Balázsi, Csaba</creatorcontrib><creatorcontrib>Kiricsi, Imre</creatorcontrib><creatorcontrib>Wéber, Ferenc</creatorcontrib><creatorcontrib>Arató, Péter</creatorcontrib><creatorcontrib>Biró, L.P.</creatorcontrib><creatorcontrib>Kónya, Zoltán</creatorcontrib><title>Development of Preparation Processes for CNT/Si3N4 Composites</title><title>Key engineering materials</title><description>Silicon nitride based composites with different amount (1, 3 and 5 wt%) of carbon
nanotubes have been prepared. Optimisation of the manufacturing processes has been conducted to preserve the carbon nanotubes in composites and to avoid damaging during high temperature processing. The first results show that carbon nanotubes have a good contact to the surface of silicon nitride grains. With increasing the carbon nanotube content a lower densification rate was obtained together with the deterioration of the mechanical characteristics of composites. In the case of 1wt% and 3 wt% carbon nanotube addition the increase of pressure resulted in increase of bending strength. It was found that microstructure features achieved by properly designed sintering parameters are the main responsible factors for the strength improvements.</description><issn>1013-9826</issn><issn>1662-9795</issn><issn>1662-9795</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2005</creationdate><recordtype>article</recordtype><recordid>eNqNkEtLw0AURoMoWKv_Iavuks6dR5JZKEqtD6xVsK6H6eQGU5JMnEkt_ntHKrjU1f0Wh3PhRNEESMoJLaa73S71psZuqKvapB0O04f5Y0olSYGJg2gEWUYTmUtxGDYBlsiCZsfRifcbQhgUIEbR-TV-YGP7NmhiW8XPDnvt9FDbLmxr0Hv0cWVdPFuupi81W_J4Ztve-npAfxodVbrxePZzx9HrzXw1u0sWT7f3s6tFYhglQ5KXwNdIQTPUsJYcjOAInIk8L1AIbZgpeVGWkmuijWEScoJcGolryWhG2Tia7L29s-9b9INqa2-waXSHdusVlVIwgPxvsJBQMAEBvNiDxlnvHVaqd3Wr3acCor7zqpBX_eZVIa8KecMrokLeILjcCwanOz-geVMbu3VdyPBfxRf02Ytm</recordid><startdate>20050101</startdate><enddate>20050101</enddate><creator>Kövér, Zsuzsanna</creator><creator>Balázsi, Csaba</creator><creator>Kiricsi, Imre</creator><creator>Wéber, Ferenc</creator><creator>Arató, Péter</creator><creator>Biró, L.P.</creator><creator>Kónya, Zoltán</creator><general>Trans Tech Publications Ltd</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7QQ</scope><scope>7SR</scope><scope>8FD</scope><scope>JG9</scope><scope>7QF</scope><scope>8BQ</scope></search><sort><creationdate>20050101</creationdate><title>Development of Preparation Processes for CNT/Si3N4 Composites</title><author>Kövér, Zsuzsanna ; Balázsi, Csaba ; Kiricsi, Imre ; Wéber, Ferenc ; Arató, Péter ; Biró, L.P. ; Kónya, Zoltán</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c320t-7d14be21a3ea1b941c54e1435778e55ac3cd48dd94a0acc39170e49c9eb932623</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2005</creationdate><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Kövér, Zsuzsanna</creatorcontrib><creatorcontrib>Balázsi, Csaba</creatorcontrib><creatorcontrib>Kiricsi, Imre</creatorcontrib><creatorcontrib>Wéber, Ferenc</creatorcontrib><creatorcontrib>Arató, Péter</creatorcontrib><creatorcontrib>Biró, L.P.</creatorcontrib><creatorcontrib>Kónya, Zoltán</creatorcontrib><collection>CrossRef</collection><collection>Ceramic Abstracts</collection><collection>Engineered Materials Abstracts</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><collection>Aluminium Industry Abstracts</collection><collection>METADEX</collection><jtitle>Key engineering materials</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Kövér, Zsuzsanna</au><au>Balázsi, Csaba</au><au>Kiricsi, Imre</au><au>Wéber, Ferenc</au><au>Arató, Péter</au><au>Biró, L.P.</au><au>Kónya, Zoltán</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Development of Preparation Processes for CNT/Si3N4 Composites</atitle><jtitle>Key engineering materials</jtitle><date>2005-01-01</date><risdate>2005</risdate><volume>290</volume><spage>135</spage><epage>141</epage><pages>135-141</pages><issn>1013-9826</issn><issn>1662-9795</issn><eissn>1662-9795</eissn><abstract>Silicon nitride based composites with different amount (1, 3 and 5 wt%) of carbon
nanotubes have been prepared. Optimisation of the manufacturing processes has been conducted to preserve the carbon nanotubes in composites and to avoid damaging during high temperature processing. The first results show that carbon nanotubes have a good contact to the surface of silicon nitride grains. With increasing the carbon nanotube content a lower densification rate was obtained together with the deterioration of the mechanical characteristics of composites. In the case of 1wt% and 3 wt% carbon nanotube addition the increase of pressure resulted in increase of bending strength. It was found that microstructure features achieved by properly designed sintering parameters are the main responsible factors for the strength improvements.</abstract><pub>Trans Tech Publications Ltd</pub><doi>10.4028/www.scientific.net/KEM.290.135</doi><tpages>7</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 1013-9826 |
| ispartof | Key engineering materials, 2005-01, Vol.290, p.135-141 |
| issn | 1013-9826 1662-9795 1662-9795 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_29953117 |
| source | Scientific.net Journals |
| title | Development of Preparation Processes for CNT/Si3N4 Composites |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-02T01%3A23%3A17IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Development%20of%20Preparation%20Processes%20for%20CNT/Si3N4%20Composites&rft.jtitle=Key%20engineering%20materials&rft.au=K%C3%B6v%C3%A9r,%20Zsuzsanna&rft.date=2005-01-01&rft.volume=290&rft.spage=135&rft.epage=141&rft.pages=135-141&rft.issn=1013-9826&rft.eissn=1662-9795&rft_id=info:doi/10.4028/www.scientific.net/KEM.290.135&rft_dat=%3Cproquest_cross%3E28918351%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=28918351&rft_id=info:pmid/&rfr_iscdi=true |