A HEAT RELEASE RATE MODEL OF RUBBER COMBUSTIBLES BASED ON SCALING LAWS
The purpose of this paper is to develop a Heat Release Rate (HRR) model based on scaling laws for highly combustibles materials, such as rubber or plastic, to simulate a fire in a factory, where a lot of rubber/plastic combustible is stored. Generally, a wooden crib is used to make a combustion mode...
Gespeichert in:
| Veröffentlicht in: | Journal of Environmental Engineering (Transactions of AIJ) 2007/03/30, Vol.72(613), pp.1-8 |
|---|---|
| Hauptverfasser: | , , , |
| Format: | Artikel |
| Sprache: | eng ; jpn |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 8 |
|---|---|
| container_issue | 613 |
| container_start_page | 1 |
| container_title | Journal of Environmental Engineering (Transactions of AIJ) |
| container_volume | 72 |
| creator | DEGUCHI, Yoshikazu TSUJIMOTO, Makoto AMANO, Kenji ARAKI, Fumio |
| description | The purpose of this paper is to develop a Heat Release Rate (HRR) model based on scaling laws for highly combustibles materials, such as rubber or plastic, to simulate a fire in a factory, where a lot of rubber/plastic combustible is stored. Generally, a wooden crib is used to make a combustion model in the fire engineering, and scaling laws on wooden crib are widely used to estimate the fire load of furniture, building finishes and so on. However, little is known about the rubber fire properties, those having much heavier load and rapid-expanding features than wood fire properties. A series of fire experiments using geometrical similar rubber cribs were performed, and observed data; weight loss curve, flame height and radiant intensity; showed possibility of scaling laws of rubber crib. Finally, a HRR model for rubber fire is proposed. |
| doi_str_mv | 10.3130/aije.72.1_3 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_29821685</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>29821685</sourcerecordid><originalsourceid>FETCH-LOGICAL-c1713-c0259bffcc6adda7c9cc1ebb858710bfa8f6ab9f6ba3244f8713bb7aa291b3033</originalsourceid><addsrcrecordid>eNo90MlOwzAQBuAIgURVeuIFfOKCUjxxFueYtO5G2khJKrhZtutAqnQhbg-8Pa6KOpcZjT6NNL_jPAMeEiD4TTRbPYy8IXBy5_SAUnApRJ_3diY-dXFIg0dnYEwjsUcgxGEIPWeSoBlLKlSwjCUlQ0VSMbTMxyxD-QQV6zRlBRrly3RdVvM0YyVKLRujfIXKUZLNV1OUJR_lk_NQi9bowX_vO-sJq0YzN8unc-tcBREQV2EviGVdKxWKzUZEKlYKtJQ0oBFgWQtah0LGdSgF8Xy_tlsiZSSEF4MkmJC-83K9e-wOP2dtTnzXGKXbVuz14Wy4F1MP7KMWvl6h6g7GdLrmx67Zie6XA-aXuPglLh553MZl9eKqt-YkvvTNiu7UqFbfbAjk0t4X2JYfBBGmcEPqW3Rc78kfH7Vw3w</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>29821685</pqid></control><display><type>article</type><title>A HEAT RELEASE RATE MODEL OF RUBBER COMBUSTIBLES BASED ON SCALING LAWS</title><source>J-STAGE (Japan Science & Technology Information Aggregator, Electronic) Freely Available Titles - Japanese</source><creator>DEGUCHI, Yoshikazu ; TSUJIMOTO, Makoto ; AMANO, Kenji ; ARAKI, Fumio</creator><creatorcontrib>DEGUCHI, Yoshikazu ; TSUJIMOTO, Makoto ; AMANO, Kenji ; ARAKI, Fumio</creatorcontrib><description>The purpose of this paper is to develop a Heat Release Rate (HRR) model based on scaling laws for highly combustibles materials, such as rubber or plastic, to simulate a fire in a factory, where a lot of rubber/plastic combustible is stored. Generally, a wooden crib is used to make a combustion model in the fire engineering, and scaling laws on wooden crib are widely used to estimate the fire load of furniture, building finishes and so on. However, little is known about the rubber fire properties, those having much heavier load and rapid-expanding features than wood fire properties. A series of fire experiments using geometrical similar rubber cribs were performed, and observed data; weight loss curve, flame height and radiant intensity; showed possibility of scaling laws of rubber crib. Finally, a HRR model for rubber fire is proposed.</description><identifier>ISSN: 1348-0685</identifier><identifier>EISSN: 1881-817X</identifier><identifier>DOI: 10.3130/aije.72.1_3</identifier><language>eng ; jpn</language><publisher>Architectural Institute of Japan</publisher><subject>Flame Height ; Radiant Intensity ; Rubber Combustibles ; Scaling Laws ; Weight Loss</subject><ispartof>Journal of Environmental Engineering (Transactions of AIJ), 2007/03/30, Vol.72(613), pp.1-8</ispartof><rights>2007 Architectural Institute of Japan</rights><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><cites>FETCH-LOGICAL-c1713-c0259bffcc6adda7c9cc1ebb858710bfa8f6ab9f6ba3244f8713bb7aa291b3033</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,1883,27924,27925</link.rule.ids></links><search><creatorcontrib>DEGUCHI, Yoshikazu</creatorcontrib><creatorcontrib>TSUJIMOTO, Makoto</creatorcontrib><creatorcontrib>AMANO, Kenji</creatorcontrib><creatorcontrib>ARAKI, Fumio</creatorcontrib><title>A HEAT RELEASE RATE MODEL OF RUBBER COMBUSTIBLES BASED ON SCALING LAWS</title><title>Journal of Environmental Engineering (Transactions of AIJ)</title><addtitle>J. Environ. Eng.</addtitle><description>The purpose of this paper is to develop a Heat Release Rate (HRR) model based on scaling laws for highly combustibles materials, such as rubber or plastic, to simulate a fire in a factory, where a lot of rubber/plastic combustible is stored. Generally, a wooden crib is used to make a combustion model in the fire engineering, and scaling laws on wooden crib are widely used to estimate the fire load of furniture, building finishes and so on. However, little is known about the rubber fire properties, those having much heavier load and rapid-expanding features than wood fire properties. A series of fire experiments using geometrical similar rubber cribs were performed, and observed data; weight loss curve, flame height and radiant intensity; showed possibility of scaling laws of rubber crib. Finally, a HRR model for rubber fire is proposed.</description><subject>Flame Height</subject><subject>Radiant Intensity</subject><subject>Rubber Combustibles</subject><subject>Scaling Laws</subject><subject>Weight Loss</subject><issn>1348-0685</issn><issn>1881-817X</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2007</creationdate><recordtype>article</recordtype><recordid>eNo90MlOwzAQBuAIgURVeuIFfOKCUjxxFueYtO5G2khJKrhZtutAqnQhbg-8Pa6KOpcZjT6NNL_jPAMeEiD4TTRbPYy8IXBy5_SAUnApRJ_3diY-dXFIg0dnYEwjsUcgxGEIPWeSoBlLKlSwjCUlQ0VSMbTMxyxD-QQV6zRlBRrly3RdVvM0YyVKLRujfIXKUZLNV1OUJR_lk_NQi9bowX_vO-sJq0YzN8unc-tcBREQV2EviGVdKxWKzUZEKlYKtJQ0oBFgWQtah0LGdSgF8Xy_tlsiZSSEF4MkmJC-83K9e-wOP2dtTnzXGKXbVuz14Wy4F1MP7KMWvl6h6g7GdLrmx67Zie6XA-aXuPglLh553MZl9eKqt-YkvvTNiu7UqFbfbAjk0t4X2JYfBBGmcEPqW3Rc78kfH7Vw3w</recordid><startdate>20070330</startdate><enddate>20070330</enddate><creator>DEGUCHI, Yoshikazu</creator><creator>TSUJIMOTO, Makoto</creator><creator>AMANO, Kenji</creator><creator>ARAKI, Fumio</creator><general>Architectural Institute of Japan</general><scope>AAYXX</scope><scope>CITATION</scope><scope>8FD</scope><scope>FR3</scope><scope>KR7</scope></search><sort><creationdate>20070330</creationdate><title>A HEAT RELEASE RATE MODEL OF RUBBER COMBUSTIBLES BASED ON SCALING LAWS</title><author>DEGUCHI, Yoshikazu ; TSUJIMOTO, Makoto ; AMANO, Kenji ; ARAKI, Fumio</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c1713-c0259bffcc6adda7c9cc1ebb858710bfa8f6ab9f6ba3244f8713bb7aa291b3033</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng ; jpn</language><creationdate>2007</creationdate><topic>Flame Height</topic><topic>Radiant Intensity</topic><topic>Rubber Combustibles</topic><topic>Scaling Laws</topic><topic>Weight Loss</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>DEGUCHI, Yoshikazu</creatorcontrib><creatorcontrib>TSUJIMOTO, Makoto</creatorcontrib><creatorcontrib>AMANO, Kenji</creatorcontrib><creatorcontrib>ARAKI, Fumio</creatorcontrib><collection>CrossRef</collection><collection>Technology Research Database</collection><collection>Engineering Research Database</collection><collection>Civil Engineering Abstracts</collection><jtitle>Journal of Environmental Engineering (Transactions of AIJ)</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>DEGUCHI, Yoshikazu</au><au>TSUJIMOTO, Makoto</au><au>AMANO, Kenji</au><au>ARAKI, Fumio</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>A HEAT RELEASE RATE MODEL OF RUBBER COMBUSTIBLES BASED ON SCALING LAWS</atitle><jtitle>Journal of Environmental Engineering (Transactions of AIJ)</jtitle><addtitle>J. Environ. Eng.</addtitle><date>2007-03-30</date><risdate>2007</risdate><volume>72</volume><issue>613</issue><spage>1</spage><epage>8</epage><pages>1-8</pages><issn>1348-0685</issn><eissn>1881-817X</eissn><abstract>The purpose of this paper is to develop a Heat Release Rate (HRR) model based on scaling laws for highly combustibles materials, such as rubber or plastic, to simulate a fire in a factory, where a lot of rubber/plastic combustible is stored. Generally, a wooden crib is used to make a combustion model in the fire engineering, and scaling laws on wooden crib are widely used to estimate the fire load of furniture, building finishes and so on. However, little is known about the rubber fire properties, those having much heavier load and rapid-expanding features than wood fire properties. A series of fire experiments using geometrical similar rubber cribs were performed, and observed data; weight loss curve, flame height and radiant intensity; showed possibility of scaling laws of rubber crib. Finally, a HRR model for rubber fire is proposed.</abstract><pub>Architectural Institute of Japan</pub><doi>10.3130/aije.72.1_3</doi><tpages>8</tpages><oa>free_for_read</oa></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 1348-0685 |
| ispartof | Journal of Environmental Engineering (Transactions of AIJ), 2007/03/30, Vol.72(613), pp.1-8 |
| issn | 1348-0685 1881-817X |
| language | eng ; jpn |
| recordid | cdi_proquest_miscellaneous_29821685 |
| source | J-STAGE (Japan Science & Technology Information Aggregator, Electronic) Freely Available Titles - Japanese |
| subjects | Flame Height Radiant Intensity Rubber Combustibles Scaling Laws Weight Loss |
| title | A HEAT RELEASE RATE MODEL OF RUBBER COMBUSTIBLES BASED ON SCALING LAWS |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-25T20%3A12%3A24IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=A%20HEAT%20RELEASE%20RATE%20MODEL%20OF%20RUBBER%20COMBUSTIBLES%20BASED%20ON%20SCALING%20LAWS&rft.jtitle=Journal%20of%20Environmental%20Engineering%20(Transactions%20of%20AIJ)&rft.au=DEGUCHI,%20Yoshikazu&rft.date=2007-03-30&rft.volume=72&rft.issue=613&rft.spage=1&rft.epage=8&rft.pages=1-8&rft.issn=1348-0685&rft.eissn=1881-817X&rft_id=info:doi/10.3130/aije.72.1_3&rft_dat=%3Cproquest_cross%3E29821685%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=29821685&rft_id=info:pmid/&rfr_iscdi=true |