Laser transformation hardening of Ti-6Al-4V in solid state with accompanying kinetic model
Laser transformation hardening in the solid state is shown to successfully provide a surface hardness increase of almost 40% for Ti-6Al-4V with a case depth over 2.5 mm while reducing surface damage. This was completed by testing a matrix of four conditions using a direct diode laser, varying the po...
Gespeichert in:
| Veröffentlicht in: | Surface engineering 2007-03, Vol.23 (2), p.78-82 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 82 |
|---|---|
| container_issue | 2 |
| container_start_page | 78 |
| container_title | Surface engineering |
| container_volume | 23 |
| creator | Hahn, J. D. Shin, Y. C. Krane, M. J. M. |
| description | Laser transformation hardening in the solid state is shown to successfully provide a surface hardness increase of almost 40% for Ti-6Al-4V with a case depth over 2.5 mm while reducing surface damage. This was completed by testing a matrix of four conditions using a direct diode laser, varying the power and the travel speed, followed by a mechanical and microstructural analysis of the hardness development. A kinetic model was developed to predict these changes by explaining the amount of α that transforms to β upon heating and the fraction of martensitic α′ that forms with natural quenching. The model matched the experimental results reasonably well with the major separation due to the poor hardenability of Ti-6Al-4V. |
| doi_str_mv | 10.1179/174329407X169467 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_sage_</sourceid><recordid>TN_cdi_proquest_miscellaneous_29347037</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sage_id>10.1179_174329407X169467</sage_id><sourcerecordid>29347037</sourcerecordid><originalsourceid>FETCH-LOGICAL-c279t-ddfde8f8c90256a8e20f220f1777f4e8fadcce1cfd140e6f9b6c2b2d57d44ed13</originalsourceid><addsrcrecordid>eNp9kE1LAzEQhoMoWKt3jzl5iybZdLOLp1L8goKXKuIlpPloU7NJTVJK_71b60nQwzAw87wD8wBwSfA1Iby9IZxVtGWYv5G6ZTU_AoP9CPUzdgwGmNYc4YaxU3CW8wpjSngzGoD3qcwmwZJkyDamThYXA1zKpE1wYQGjhTOH6rFH7BW6AHP0TsNcZDFw68oSSqVit5Zht6c_XDDFKdhFbfw5OLHSZ3Px04fg5f5uNnlE0-eHp8l4ihTlbUFaW20a26gW01EtG0OxpX0Rzrll_UZqpQxRVhOGTW3bea3onOoR14wZTaohuDrcXaf4uTG5iM5lZbyXwcRNFrStGMcV70F8AFWKOSdjxTq5TqadIFjsJYrfEvsIOkSyXBixipsU-lf-428PvAvfNrcxeS2K3PmYbO9YuSyqP9NffRqGHQ</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>29347037</pqid></control><display><type>article</type><title>Laser transformation hardening of Ti-6Al-4V in solid state with accompanying kinetic model</title><source>SAGE Complete</source><creator>Hahn, J. D. ; Shin, Y. C. ; Krane, M. J. M.</creator><creatorcontrib>Hahn, J. D. ; Shin, Y. C. ; Krane, M. J. M.</creatorcontrib><description>Laser transformation hardening in the solid state is shown to successfully provide a surface hardness increase of almost 40% for Ti-6Al-4V with a case depth over 2.5 mm while reducing surface damage. This was completed by testing a matrix of four conditions using a direct diode laser, varying the power and the travel speed, followed by a mechanical and microstructural analysis of the hardness development. A kinetic model was developed to predict these changes by explaining the amount of α that transforms to β upon heating and the fraction of martensitic α′ that forms with natural quenching. The model matched the experimental results reasonably well with the major separation due to the poor hardenability of Ti-6Al-4V.</description><identifier>ISSN: 0267-0844</identifier><identifier>EISSN: 1743-2944</identifier><identifier>DOI: 10.1179/174329407X169467</identifier><language>eng</language><publisher>London, England: Taylor & Francis</publisher><subject>HARDNESS PREDICTION ; KINETIC MODELING ; LASER HARDENING ; TI-6AL-4V</subject><ispartof>Surface engineering, 2007-03, Vol.23 (2), p.78-82</ispartof><rights>2007 Maney Publishing 2007</rights><rights>2007 Maney Publishing</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c279t-ddfde8f8c90256a8e20f220f1777f4e8fadcce1cfd140e6f9b6c2b2d57d44ed13</citedby></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://journals.sagepub.com/doi/pdf/10.1179/174329407X169467$$EPDF$$P50$$Gsage$$H</linktopdf><linktohtml>$$Uhttps://journals.sagepub.com/doi/10.1179/174329407X169467$$EHTML$$P50$$Gsage$$H</linktohtml><link.rule.ids>314,776,780,21798,27901,27902,43597,43598</link.rule.ids></links><search><creatorcontrib>Hahn, J. D.</creatorcontrib><creatorcontrib>Shin, Y. C.</creatorcontrib><creatorcontrib>Krane, M. J. M.</creatorcontrib><title>Laser transformation hardening of Ti-6Al-4V in solid state with accompanying kinetic model</title><title>Surface engineering</title><description>Laser transformation hardening in the solid state is shown to successfully provide a surface hardness increase of almost 40% for Ti-6Al-4V with a case depth over 2.5 mm while reducing surface damage. This was completed by testing a matrix of four conditions using a direct diode laser, varying the power and the travel speed, followed by a mechanical and microstructural analysis of the hardness development. A kinetic model was developed to predict these changes by explaining the amount of α that transforms to β upon heating and the fraction of martensitic α′ that forms with natural quenching. The model matched the experimental results reasonably well with the major separation due to the poor hardenability of Ti-6Al-4V.</description><subject>HARDNESS PREDICTION</subject><subject>KINETIC MODELING</subject><subject>LASER HARDENING</subject><subject>TI-6AL-4V</subject><issn>0267-0844</issn><issn>1743-2944</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2007</creationdate><recordtype>article</recordtype><recordid>eNp9kE1LAzEQhoMoWKt3jzl5iybZdLOLp1L8goKXKuIlpPloU7NJTVJK_71b60nQwzAw87wD8wBwSfA1Iby9IZxVtGWYv5G6ZTU_AoP9CPUzdgwGmNYc4YaxU3CW8wpjSngzGoD3qcwmwZJkyDamThYXA1zKpE1wYQGjhTOH6rFH7BW6AHP0TsNcZDFw68oSSqVit5Zht6c_XDDFKdhFbfw5OLHSZ3Px04fg5f5uNnlE0-eHp8l4ihTlbUFaW20a26gW01EtG0OxpX0Rzrll_UZqpQxRVhOGTW3bea3onOoR14wZTaohuDrcXaf4uTG5iM5lZbyXwcRNFrStGMcV70F8AFWKOSdjxTq5TqadIFjsJYrfEvsIOkSyXBixipsU-lf-428PvAvfNrcxeS2K3PmYbO9YuSyqP9NffRqGHQ</recordid><startdate>20070301</startdate><enddate>20070301</enddate><creator>Hahn, J. D.</creator><creator>Shin, Y. C.</creator><creator>Krane, M. J. M.</creator><general>Taylor & Francis</general><general>SAGE Publications</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>7TB</scope><scope>7U5</scope><scope>8BQ</scope><scope>8FD</scope><scope>F28</scope><scope>FR3</scope><scope>JG9</scope><scope>L7M</scope></search><sort><creationdate>20070301</creationdate><title>Laser transformation hardening of Ti-6Al-4V in solid state with accompanying kinetic model</title><author>Hahn, J. D. ; Shin, Y. C. ; Krane, M. J. M.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c279t-ddfde8f8c90256a8e20f220f1777f4e8fadcce1cfd140e6f9b6c2b2d57d44ed13</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2007</creationdate><topic>HARDNESS PREDICTION</topic><topic>KINETIC MODELING</topic><topic>LASER HARDENING</topic><topic>TI-6AL-4V</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Hahn, J. D.</creatorcontrib><creatorcontrib>Shin, Y. C.</creatorcontrib><creatorcontrib>Krane, M. J. M.</creatorcontrib><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>Mechanical & Transportation Engineering Abstracts</collection><collection>Solid State and Superconductivity Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>ANTE: Abstracts in New Technology & Engineering</collection><collection>Engineering Research Database</collection><collection>Materials Research Database</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>Surface engineering</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Hahn, J. D.</au><au>Shin, Y. C.</au><au>Krane, M. J. M.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Laser transformation hardening of Ti-6Al-4V in solid state with accompanying kinetic model</atitle><jtitle>Surface engineering</jtitle><date>2007-03-01</date><risdate>2007</risdate><volume>23</volume><issue>2</issue><spage>78</spage><epage>82</epage><pages>78-82</pages><issn>0267-0844</issn><eissn>1743-2944</eissn><abstract>Laser transformation hardening in the solid state is shown to successfully provide a surface hardness increase of almost 40% for Ti-6Al-4V with a case depth over 2.5 mm while reducing surface damage. This was completed by testing a matrix of four conditions using a direct diode laser, varying the power and the travel speed, followed by a mechanical and microstructural analysis of the hardness development. A kinetic model was developed to predict these changes by explaining the amount of α that transforms to β upon heating and the fraction of martensitic α′ that forms with natural quenching. The model matched the experimental results reasonably well with the major separation due to the poor hardenability of Ti-6Al-4V.</abstract><cop>London, England</cop><pub>Taylor & Francis</pub><doi>10.1179/174329407X169467</doi><tpages>5</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0267-0844 |
| ispartof | Surface engineering, 2007-03, Vol.23 (2), p.78-82 |
| issn | 0267-0844 1743-2944 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_29347037 |
| source | SAGE Complete |
| subjects | HARDNESS PREDICTION KINETIC MODELING LASER HARDENING TI-6AL-4V |
| title | Laser transformation hardening of Ti-6Al-4V in solid state with accompanying kinetic model |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-29T00%3A07%3A04IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_sage_&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Laser%20transformation%20hardening%20of%20Ti-6Al-4V%20in%20solid%20state%20with%20accompanying%20kinetic%20model&rft.jtitle=Surface%20engineering&rft.au=Hahn,%20J.%20D.&rft.date=2007-03-01&rft.volume=23&rft.issue=2&rft.spage=78&rft.epage=82&rft.pages=78-82&rft.issn=0267-0844&rft.eissn=1743-2944&rft_id=info:doi/10.1179/174329407X169467&rft_dat=%3Cproquest_sage_%3E29347037%3C/proquest_sage_%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=29347037&rft_id=info:pmid/&rft_sage_id=10.1179_174329407X169467&rfr_iscdi=true |