Photoluminescence and thermoluminescence dosimetry properties of Ag/Y co‐doped ZnO nanophosphor for radiation measurements

This work explores the thermoluminescence (TL) and photoluminescence (PL) properties of Ag/Y co‐doped zinc oxide (ZnO) nanophosphor. The proposed dosimeter was prepared by the coprecipitation method and sintered at temperatures from 400°C to 1000°C in an air atmosphere. Raman spectroscopy was studied to investigate the structural features of this composition. The new proposed dosimeter revealed two peaks at 150°C and 175°C with a small shoulder at high temperature (225°C). The PL spectrum showed strong green emissions between 500 to 550 nm. The Raman spectrum showed many bands related to the interaction between ZnO, silver (Ag), and yttrium oxide (Y2O3). The rising sintering temperature enhanced the TL glow curve intensity. The Ag/Y co‐doped ZnO nanophosphor showed an excellent linearity index within a dose from 1 to 4 Gy. The minimum detectable dose (MDD) of the Ag/Y co‐doped ZnO nanopowder (pellets) equaled 0.518 mGy. The main TL properties were achieved in this work as follows: thermal fading (37% after 45 days at 1 and 4 Gy), optical fading (53% after 1 h and 68% after 6 h by exposure to sunlight), effective atomic number (27.6), and energy response (flat behavior from 0.1 to 1.3 MeV). Finally, the proposed material shows promising results nominated to be used for radiation measurements. The Ag/Y codoped zinc oxide (ZnO) nanophosphors group was prepared to explore the thermoluminescence (TL) and photoluminescence (PL) properties. These samples were exposed to gamma and then read by a thermoluminescence dosimeter (TLD) reader; different TLD properties were investigated.